The National Instruments cDAQ-9174 is a four slot USB CompactDAQ chassis for C Series modules. It provides a compact platform for building mixed measurement systems that connect to a host computer over USB. The chassis supports analog input, analog output, digital I O, counters, temperature, strain, and other C Series modules.
The cDAQ-9174 is useful when a test system needs several measurement functions in one chassis without the size of a larger CompactDAQ system. Engineers can combine voltage, current, temperature, digital, and counter modules while using one USB connection. This modular approach supports laboratory testing, industrial monitoring, automated test fixtures, and research systems that require flexible acquisition.
Four Slot Modular Design
The cDAQ-9174 provides four slots for compatible C Series modules. This slot count supports focused mixed measurement systems. Modules can be selected for signal range, isolation, resolution, sample rate, and connector type. The chassis provides the mechanical and electrical interface for the modules.
With four slots, engineers can build a system that matches a specific test requirement. For example, a test station might use an analog input module for voltage, a temperature module, and a digital module for status signals. This integration reduces cabling and simplifies software configuration.
USB Connectivity
The cDAQ-9174 uses USB to connect to a host computer. USB connectivity simplifies setup and allows the chassis to be used with laptops, desktop computers, and industrial computers. The host computer runs the application software and stores data, while the chassis handles module communication and timing.
For portable or benchtop systems, the USB link provides a straightforward connection. Engineers should verify host USB capability and power requirements when planning the system. Proper cable management and strain relief help maintain reliable communication.
Timing and Synchronization
The cDAQ-9174 includes integrated timing and synchronization features for CompactDAQ modules. These features support coordinated acquisition across multiple modules and channels. Engineers can use hardware timing, triggers, and shared clocks to align measurements. This is important when comparing signals from different modules or capturing events across multiple sensors.
Timing configuration depends on module types and application requirements. Some measurements require simultaneous sampling, while others can use multiplexed scanning. The chassis provides the infrastructure for module timing, and software configuration defines acquisition behavior. Careful planning helps preserve timing relationships.
Software and Application Development
The cDAQ-9174 is designed to work with NI data acquisition software and standard programming environments. Engineers can configure channels, set sample rates, create triggers, log data, and build user interfaces. The chassis and modules appear as a measurement system in software, allowing reuse of code across different CompactDAQ configurations.
For automated test, the chassis can be integrated into test sequences that control stimuli, acquire responses, and evaluate results. For monitoring applications, it can run continuous acquisition and log data to disk. The software workflow can be adapted to laboratory research, production testing, and industrial diagnostics.
Applications
The cDAQ-9174 is suitable for mixed signal testing, sensor monitoring, automotive component validation, industrial automation, energy research, and educational laboratories. In a production fixture, it can acquire electrical and physical measurements in one test cycle. In a laboratory, it can support multiple experiments by changing modules and software configuration.
The four slot chassis is also useful when a system must remain compact. Engineers can start with a few modules and add more as test requirements expand. This modular growth path supports changing measurement needs while keeping the system manageable.
Installation and Maintenance
Installation requires connecting the chassis to power, inserting compatible C Series modules, and connecting the USB cable to the host computer. Modules should be seated firmly and connectors should be accessible. The chassis should be placed where airflow is not blocked and ambient conditions are within the operating range.
Maintenance includes checking module seating, inspecting connectors, verifying USB communication, and reviewing software configuration. For continuous operation, periodic checks of power, cooling, and data storage are recommended. Documentation of module positions and channel assignments helps maintain repeatability when the system is reconfigured.
Summary
The National Instruments cDAQ-9174 CompactDAQ Chassis provides four slots for C Series modules in a flexible USB based measurement system. It supports mixed signal acquisition, integrated timing, and a wide range of measurement modules. The cDAQ-9174 is a practical chassis for engineers who need a compact, expandable, and software compatible platform for laboratory, industrial, and automated test applications.
