PROSOFT PTQ-PDPMV1 Master module

PROSOFT PTQ-PDPMV1 Master module

DESCRIPTION

The PROFIBUS DPV1 Master module is a powerful communication interface for  Quantum processors. Developed under license from Schneider Electric, the module  incorporates proprietary backplane technology that enables powerful data exchange  with processors.  

The module supports complete Master specifications according to IEC 61158. Acyclic  parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing  processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1  protocol.

The module acts as an input/output module between the PROFIBUS network and the  processor. Data transfer from the processor is asynchronous with the I/O data transfer  on the PROFIBUS network.  

Features

·Easy to configure and manage

·Industry Recognition

·Rugged and reliable

·Backed by ProSoft Technology

Benefits  

♦ Includes ProSoft Configuration Builder software to design, configure and monitor your  PROFIBUS network  

♦ Includes PROFIBUS DPV1 Master FDT (Field Device Tool) communication DTM  (PROFIBUS comDTM) software to interface between any compliant FDT software container,  an FDT device DTM, and applicable PROFIBUS slave devices  

♦ Configure PTQ module and PROFIBUS network over Ethernet

♦ Schneider Electric CAPP (Collaborative Automation Partner Program) approved  

♦ PROFIBUS Trade Organization (PTO) approved

♦ The module is built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor  

♦ The firmware is flash-upgradable  

♦ Adheres to the Unity HEC Hot Standby Functional Specifications.  

♦ Supports up to six PTQ-PDPMV1 modules per rack (up to four for Hot Standby  implementations)  

♦ Supports extended diagnostic data, alarm indications and confirmations handling, Multicast  and Broadcast telegrams (DPV1)  

♦ Industrial data communications experts who understand your protocols, devices, and  applications  

♦ Three year standard warranty  

General Specifications

• Single Slot - Quantum backplane compatible  

• The module is recognized as an Options module and has access to PLC memory  for data transfer  

• Configuration data is stored in non-volatile memory in the ProTalk®  module  

• Configuration software for Microsoft Windows XP, 2000 and NT is included with the  module  

• Up to six modules can be placed in a rack  

• Local rack - The module must be placed in the same rack as processor  

• Compatible with all common Quantum programming packages, including Concept  (version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX (version 2.20 or  later)  

• Quantum data types supported: 3x, 4x  

• High speed data transfer across backplane provides quick data update times  

• Sample ladder file available

Functional Specifications

• Easy-to-use drag and drop Busview configuration interface via ProSoft  Configuration Builder software (see PSW-PCB Datasheet)  

• Monitor/Modify of process data and DPV1 acyclic data with online slave diagnostics  

• Supports PROFIBUS PA slaves on the network through DP/PA coupler or link  

• Supports up to 125 slave devices with repeaters  

• Supports extended diagnostic data (DPV1)  

• Supports all standardized baud rates, up to 12 Mbits/s  

• Auto baud detection at all valid PROFIBUS DPV1 rates  

• Supports PROFIdrive 3.1 compliant parameter read and write operations  

• Supports Sync and Freeze commands  

• Alarm indications and confirmations handling (DPV1)  

• Supports Multicast and Broadcast telegrams (DPV1)  

• CRC checksum determination of slave configuration consistency to processor  

• FDT/DTM PROFIBUS master transport communication DTM software included  (see PSW-CDTM-PDPM)