PROSOFT MVI69-PDPMV1 Communication Module

PROSOFT MVI69-PDPMV1 Communication Module

DESCRIPTION

The PROFIBUS DPV1 Master module is a powerful communication interface  for Rockwell Automation® CompactLogix / MicroLogix® processors. Developed under license from Rockwell Automation, the module  incorporates proprietary backplane technology that enables powerful data  exchange with CompactLogix / MicroLogix processors.

The module supports complete Master specifications according to IEC  61158. Acyclic parameter data can be transferred with Class 1 or Class 2  DPV1 services, allowing processors to easily communicate with slave  devices supporting PROFIBUS DPV0/V1 protocol.

The module acts as an input/output module between the PROFIBUS network  and the CompactLogix / MicroLogix processor. Data transfer from the  processor is asynchronous with the I/O data transfer on the PROFIBUS  network.

Features

 Single-slot - 1769 backplane compatible  

 The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and  module  

 Ladder Logic is used for data transfer between module memory and processor controller tags. A sample ladder file with AOI is  included  

 Configuration data obtained from ProSoft Configuration Builder Software, which defines the PROFIBUS network, and then  downloads the configuration to the module using the serial port of the PC  

 Supports CompactLogix and MicroLogix 1500 LRP Controllers except 1769-QBFC1B, 1769-L16x, and 1769-L18x

Functional Specifications

The inRAx PDPMV1 PROFIBUS Master module acts as a PROFIBUS network scanner,  transferring input and output data between PROFIBUS devices and processor data  memory over the backplane.

 Master Busview configuration interface via included ProSoft Configuration Builder software (Part Number PSW-PCB) 

 Project-unique GSD file import library 

 Monitoring and modification of process data and DPV1 acyclic data 

 Multi-drop on a PROFIBUS DPV1 network with other compatible devices 

 Automatic project documentation  Automatic Bus Parameter calculation 

 Online slave diagnostics 

 Supports all standardized baud rates, up to 12 Mbps 

 Supports extended diagnostic data (DPV1) 

 Multiple Masters can be placed in a single rack 

 CRC checksum determination of slave configuration consistency to processor 

 Master Status LED indicators for Operations, Network Communication, Master Token-Hold and Network Configuration 

 FDT/DTM PROFIBUS Master transport communication DTM software included (Part Number PSW-CDTM-PDPM)

PROFIBUS Master Specifications

 Up to 125 slaves can be connected with a repeater 

 Up to 1536 cyclic bytes input and 1536 bytes output data 

 Supports Extended Diagnostic Data 

 RS-485 optically isolated PROFIBUS interface with on board DC-DC converter 

 Acyclic communications (DPV1), Read and Write 

 Alarm handling (DPV1) 

 Supports Sync and Freeze commands 

 Supports PROFIdrive 3.1 compliant parameter read and write operations 

 Supports Multicast and Broadcast telegrams (DPV1)

PROFIBUS Master Port

 DB-9F optically isolated RS-485 

 Ready, Run, Error and Token LED Indicators 

 PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector and isolated opto-couplers