The AZPF-1X-004RCB20KB, material number 0510225006, is an external gear pump within the Rexroth AZPF series. It is a fixed-displacement hydraulic pump that delivers a constant flow proportional to its rotational speed. The pump is designed for industrial hydraulic systems, where it converts mechanical power from a drive motor into hydraulic pressure and flow for actuators, valves, and other hydraulic components. The type code identifies the pump’s size, rotation direction, connection configuration, and shaft design.
The AZPF-1X-004RCB20KB has a size 004 displacement, which indicates the volume of fluid delivered per revolution of the pump shaft. The pump operates on the external gear principle: two meshing gears rotate inside a housing, and the spaces between the gear teeth carry fluid from the suction side to the pressure side. The meshing point of the gears provides a seal between the suction and pressure chambers, and the fluid is displaced as the gears rotate.
The external gear design is characterized by a simple construction, few moving parts, and robust operation. The pump’s flow is essentially constant for a given shaft speed, making it suitable for hydraulic systems that require a fixed flow source. The pressure capability of the pump depends on the housing, bearing, and seal design, and the AZPF series covers a range of pressure ratings for industrial applications.
The AZPF-1X-004RCB20KB uses a cast iron body for the pump housing, providing the strength and rigidity required for hydraulic pressure containment. The gear set and bearing arrangement are designed for the loads imposed by the operating pressure and the drive torque. The shaft is supported by bearings that are lubricated by the hydraulic fluid, and the shaft seal prevents leakage at the drive end.
The RCB20KB segment of the type code defines the pump’s connection and shaft configuration. This segment specifies the port arrangement, the mounting flange, and the drive shaft type, allowing the pump to be matched to the hydraulic circuit and the drive motor. The rotation direction is also defined by the type code, ensuring that the pump’s suction and pressure ports are correctly oriented for the installation.
The pump is installed in a hydraulic circuit with a suction line from the reservoir and a pressure line to the system. The suction line must be sized to avoid cavitation, and the pressure line must be rated for the maximum operating pressure. The pump’s inlet and outlet ports are connected to the circuit through the specified fittings, and the mounting flange is attached to the drive motor or the machine frame.
The AZPF-1X-004RCB20KB is designed for continuous operation within its specified pressure and speed limits. The pump’s volumetric efficiency depends on the internal clearances and the fluid viscosity, and the hydraulic system must be configured with the appropriate filtration and fluid condition to maintain performance and service life. The pump’s external leakage is controlled by the shaft seal and the housing joints, and the drain arrangement must be connected according to the installation requirements.
The AZPF-1X-004RCB20KB is intended for industrial hydraulic systems that require a compact, fixed-displacement pump with a size 004 displacement. Typical applications include machine tools, presses, injection molding machines, and general hydraulic power units where a constant flow source is needed. The pump’s cast iron construction and external gear principle provide robust operation in demanding industrial environments. As a member of the Rexroth AZPF series, the pump follows the platform’s conventions for displacement, port configuration, shaft design, and pressure rating, allowing it to be integrated into hydraulic circuits with standard components and fittings.



