The NFD03.1-480-055 is a Powerline filter within the Rexroth line of electromagnetic compatibility components for industrial drive systems. It is a three-phase filter designed to be installed on the mains supply side of drive equipment, where it reduces the conducted high-frequency interference generated by the switching power semiconductors of inverters and servo drives. The filter’s voltage and current ratings, indicated by the 480 and 055 segments of the type code, position it for use in cabinets that supply drive systems from a 480 VAC three-phase network with currents up to approximately 55 A.
Drive systems use pulse-width modulation to control motor voltage and current, and this switching action generates high-frequency noise on the mains supply. The NFD03.1-480-055 contains inductive and capacitive filter elements that attenuate this noise, limiting the conducted emissions that can travel back onto the plant power network. By reducing the high-frequency components on the supply line, the filter helps the drive system meet the electromagnetic compatibility requirements applicable to industrial equipment.
The filter is designed for three-phase operation and includes filter elements for each phase. The exact attenuation characteristic depends on the filter’s internal topology and the impedance of the surrounding power network. The NFD03.1-480-055 is selected to match the current and voltage rating of the drive system, ensuring that the filter can carry the full load current without excessive voltage drop or thermal stress.
The filter is housed in a compact enclosure intended for mounting in a control cabinet. The mains supply is connected to the filter input, and the drive system is connected to the filter output. The filter’s terminals are sized for the rated current, and the enclosure provides the creepage and clearance distances required for the operating voltage. The filter is typically mounted close to the drive system to minimize the length of unfiltered cable between the filter output and the drive input.
The NFD03.1-480-055 is designed for the thermal and mechanical conditions of an industrial cabinet. The filter’s inductors and capacitors generate losses during operation, and the enclosure and mounting arrangement provide the necessary heat dissipation. The filter’s construction includes protection against accidental contact with live terminals, consistent with the safety requirements for industrial control equipment.
In a drive system, the NFD03.1-480-055 is part of the power supply chain that runs from the plant mains to the drive input. The filter works in combination with the drive’s internal filtering, the motor cable shielding, and the cabinet grounding arrangement to control electromagnetic interference. The filter’s performance depends on proper installation, including short and well-terminated connections, a low-impedance ground path, and separation between filtered and unfiltered cables.
The filter’s voltage rating of 480 VAC corresponds to the common three-phase supply voltage used in industrial facilities. The current rating of approximately 55 A defines the maximum continuous current that the filter can carry. For drive systems with a higher current demand, multiple filters or a larger filter model may be required, depending on the configuration and the applicable EMC standards.
The NFD03.1-480-055 is intended for industrial cabinets that contain variable-speed drives, servo drives, or other power electronic equipment supplied from a three-phase 480 VAC network. Typical applications include machinery in packaging, printing, material handling, and general automation, where the drive system must meet conducted emission limits. The filter’s role is to provide a defined attenuation path for high-frequency noise, supporting the overall electromagnetic compatibility of the machine. As a Rexroth Powerline filter, the NFD03.1-480-055 follows the platform’s conventions for voltage and current rating, cabinet mounting, and integration with drive systems.



