The Rexroth CSH01.3C-PB-ENS-MA1-CCD-S2-S-NN-FW is a drive control section used in Rexroth IndraDrive systems. It is often documented together with the HMS01.1N-W0020-A-07-NNNN power section and the R911329903 reference. Together these components form part of an industrial drive assembly that controls servo motor motion, evaluates feedback signals, manages drive parameters, and communicates with a higher level machine control system.
This article introduces the control section and its relationship to the power section for drive engineers, panel builders, commissioning teams, and maintenance personnel. It covers the product role, cabinet integration, configuration, commissioning, diagnostics, and lifecycle care. Exact interface data, firmware compatibility, terminal assignments, and approved accessories must be confirmed with the official product documentation for the specific CSH and HMS configuration.
Control Section Role
The CSH01.3C control section provides control and communication functions for the drive. It processes motion commands, evaluates motor feedback, stores drive parameters, and supports diagnostic communication. The model code contains configuration information for communication and option functions. The control section must be matched to the power section, motor, feedback system, and machine control to form a compatible drive system.
The HMS01.1N-W0020-A-07-NNNN power section supplies and controls the motor power stage. The control section and power section must be assembled and connected according to the approved system documentation. The R911329903 reference helps identify the combination in technical records. Before installation, the engineer should confirm that the control section, power section, firmware, and motor data are compatible.
Cabinet Integration
The drive should be mounted in a control cabinet with suitable clearance for cooling and service access. Power and signal cables should be routed separately. Protective grounding and shielding should follow the installation instructions. The control section should be protected from contamination and mechanical stress. Connectors should be fully engaged and secured.
Cabinet temperature must remain within the approved range. Cooling airflow should not be blocked by cables or additional components. The drive assembly should be labeled clearly so that the control section and power section can be identified during maintenance. Any replacement work should use the correct module combination and project data.
Configuration and Commissioning
Commissioning should begin with a visual inspection of the assembled drive, cables, and cabinet wiring. The drive should be configured with the correct motor data, feedback data, and communication settings. Firmware compatibility should be checked before project download. Safety circuits and emergency stop functions must be validated before normal operation.
Initial tests should be performed without a high mechanical load where possible. The engineer should check motor direction, feedback response, brake behavior, and drive status messages. Axis limits and error thresholds should be set according to the machine design. After successful commissioning, the project data and final parameters should be documented.
Diagnostics and Maintenance
Drive diagnostics provide information about supply conditions, motor feedback, thermal status, and communication. Fault messages should be interpreted with the machine documentation. If a fault occurs, the engineer should check the control section connection, power section, motor cable, feedback cable, and parameter settings. Repeated resetting without finding the cause can hide a persistent fault.
Routine maintenance should include inspection of cabinet filters, cooling fans, connectors, and cable condition. Parameter backups should be kept current. Any replacement control section should be configured with the correct firmware and project data. Qualified personnel should perform service work, and power should be isolated before connections are touched.
Application Planning Notes
The Rexroth CSH01.3C-PB-ENS-MA1-CCD-S2-S-NN-FW control section with HMS01.1N-W0020-A-07-NNNN power section is intended for industrial drive applications that require closed loop motion control and integrated diagnostics. Planning should confirm the motor match, power section rating, communication concept, cabinet cooling, and safety requirements. For exact technical data and approved application conditions, the official product documentation for this drive combination should be used as the final reference.




