The HDS05.2-W300N-HS12-01FW, identified by order reference 190019, is a drive module within the Rexroth Indramat System 200 family. System 200 is a modular drive platform in which individual drive modules are mounted in a common rack and connected to a shared DC link and communication bus. The HDS05.2 module combines power conversion and control electronics for a single servo axis, making it a self-contained drive unit that executes current, velocity, and position control tasks within the System 200 architecture.
The type code HDS05.2-W300N-HS12-01FW encodes the module’s position within the System 200 range. The HDS05.2 designation identifies the drive module generation and family. The W300N segment specifies the power class, indicating the current and voltage range for which the output stage is designed. The HS12 segment identifies the heat sink and cooling configuration, which is selected to maintain the power semiconductor temperatures within their permissible limits under the rated load profile. The 01FW suffix indicates the factory-loaded firmware version, ensuring that the module arrives with a defined software baseline for its control functions.
The module is designed for rack mounting in a System 200 drive assembly. The rack provides the mechanical support, the DC link busbars, and the communication connections between the drive modules and the higher-level control system. The HDS05.2-W300N-HS12-01FW occupies a defined slot width in the rack, and its front panel provides access to status indicators, configuration interfaces, and motor feedback connections.
The drive module contains a three-phase inverter stage that converts the DC link voltage into a controlled output for a synchronous or asynchronous servo motor. The output stage is regulated by the module’s control electronics, which execute the current control loop and, depending on the system configuration, the velocity and position control loops. The module processes motor feedback signals to determine rotor position and speed, and it uses this information to commutate the motor and close the control loops.
The System 200 platform supports a range of feedback devices and communication options, and the HDS05.2 module is configured to operate within this ecosystem. The control electronics manage the drive state machine, including enable, disable, fault handling, and diagnostic reporting. The module also monitors the DC link voltage, output current, and heat sink temperature, protecting the power stage from overload and abnormal operating conditions.
The HS12 heat sink variant is a defining characteristic of this module. The heat sink is sized to dissipate the losses generated by the power semiconductors during continuous operation at the rated output current. The cooling arrangement may rely on natural convection or forced air, depending on the rack installation and the System 200 cooling concept. The module’s thermal model is used by the control electronics to limit current when the temperature rise approaches the permissible limit, preventing overheating while allowing short-term overload for acceleration transients.
The HDS05.2-W300N-HS12-01FW is intended for industrial drive applications that use the System 200 modular platform. These applications typically require coordinated motion across multiple axes, with the drive modules sharing a common DC link and communication infrastructure. The module’s integrated control electronics allow it to operate as a standalone drive axis within the rack, receiving commands from a higher-level controller and returning feedback and status data. Its power class and heat sink configuration make it suitable for machine axes that require a defined continuous current capability and a thermal design matched to the cabinet environment.
As a member of the Indramat System 200 family, the HDS05.2-W300N-HS12-01FW follows the platform’s conventions for rack mounting, DC link connection, and communication. Its role is to provide the power and control functions for a single axis, while the System 200 architecture supplies the shared infrastructure that coordinates multiple axes into a machine motion system.



