The HMS01.1N-W0070-A-07-NNNN, part number R911295326, is a power section within the Rexroth IndraDrive M modular drive system. It is the electrical conversion module of a single-axis drive assembly, responsible for inverting the DC link voltage into a controlled three-phase output for a servo motor. The power section does not operate as a standalone drive; it is combined with a compatible control section from the IndraDrive M family to form a complete drive unit that can execute motion commands, process feedback, and communicate with a higher-level controller.
The type code HMS01.1N-W0070-A-07-NNNN identifies the module as an IndraDrive M power section in the 70 A class. The W0070 segment denotes the rated output current range, positioning the module for medium-power servo axes that require substantial current delivery without entering the high-power cabinet class. The A-07 segment specifies the cooling and connection variant, including the heat sink and fan arrangement used to dissipate the losses generated by the power semiconductors. The NNNN suffix indicates that no additional option modules are populated in the power section configuration.
The power section is designed for three-phase mains supply through a common DC bus architecture. In an IndraDrive M system, the DC link is typically supplied by a separate supply module or by a power section configured for supply operation. The HMS01.1N-W0070-A-07-NNNN draws from this DC link and produces a variable-frequency, variable-voltage output for the motor. The common DC bus arrangement allows energy from braking axes to be shared across the drive system, reducing the demand on the supply module and improving overall energy efficiency in multi-axis machines.
The power section contains the inverter bridge, gate drive circuitry, current sensing, and the thermal management components required for continuous operation. The heat sink and fan variant indicated by A-07 is selected to maintain the power semiconductor junction temperatures within their permissible limits under the rated load profile. The module monitors its thermal state and provides diagnostic information to the control section, allowing the drive system to limit current or initiate a controlled shutdown if the temperature exceeds the specified threshold.
The output stage is designed for the current and voltage demands of synchronous servo motors in industrial motion control. The DC link voltage determines the maximum output voltage available to the motor, while the rated output current defines the continuous torque capability of the connected motor. The power section’s short-circuit and overcurrent protection functions act on the output stage to protect both the drive and the motor in the event of a fault.
The HMS01.1N-W0070-A-07-NNNN is mechanically and electrically integrated with an IndraDrive M control section. The control section provides the motion control algorithms, feedback evaluation, fieldbus communication, and safety functions, while the power section provides the electrical conversion path. The two modules share a common backplane or interface within the drive assembly, and the control section reads the power section’s identification data to configure the current limits and thermal model.
This modular separation allows the power section to be selected according to the motor current requirement, while the control section is selected according to the required communication interface, encoder type, and safety profile. In a multi-axis system, different axes can use the same power section type with different control sections, simplifying spare parts management and engineering across the machine.
The HMS01.1N-W0070-A-07-NNNN is intended for industrial motion axes that require a 70 A class power stage within the IndraDrive M platform. Typical applications include packaging machinery, printing equipment, material handling systems, and general automation axes where coordinated motion and energy sharing across a common DC bus are beneficial. The module’s role is to provide the power conversion layer of the drive assembly, with the control section supplying the intelligence and communication functions. Its design reflects the IndraDrive M philosophy of modular drive construction, in which power and control functions are separated to allow flexible configuration and efficient maintenance.



