The HMD01.1N-W0020-A-07-NNNN, part number R911305062, is a drive controller within the Rexroth IndraDrive M modular drive family. It is a single-axis drive unit that combines the power conversion stage and the control electronics in one module, allowing it to operate as a complete servo drive when connected to a motor, feedback device, and higher-level controller. The W0020 segment of the type code identifies the 20 A power class, positioning the module for compact and medium-duty servo axes.
The drive controller contains a three-phase inverter stage that converts the DC link voltage into a controlled output for a synchronous servo motor. The 20 A power class defines the continuous output current capability of the module, while the peak current capability provides headroom for acceleration and overload transients. The DC link is supplied through the IndraDrive M common bus architecture, which allows multiple drives to share a single DC supply and exchange regenerative energy.
The output stage is protected against overcurrent, short-circuit, and overtemperature conditions. The module monitors the output current and the heat sink temperature, and it limits the current or initiates a fault response when the measured values exceed the specified thresholds. The A-07 segment of the type code specifies the cooling and connection variant, including the heat sink and fan arrangement used to dissipate the power losses.
The integrated control electronics execute the current control loop and, depending on the configuration, the velocity and position control loops. The module processes motor feedback signals to determine rotor position and speed, and it uses this information for commutation and closed-loop control. The IndraDrive M platform supports a range of encoder interfaces and feedback devices, and the control electronics are configured to match the motor and feedback type used in the application.
The NNNN suffix indicates that no additional option modules are populated in this drive controller configuration. The module therefore relies on its base control functions and the communication interface provided by the IndraDrive M system. In a typical installation, the drive controller receives command values from a higher-level controller over the system communication bus and returns actual position, velocity, and status data.
The HMD01.1N-W0020-A-07-NNNN is designed for mounting in an IndraDrive M drive assembly. The modular architecture allows multiple drive controllers to be arranged side by side, sharing the DC link and communication infrastructure. This arrangement simplifies cabling and reduces the cabinet space required for a multi-axis drive system. The drive controller’s front panel provides access to status indicators, configuration interfaces, and motor connections.
The module’s control electronics manage the drive state machine, including enable, disable, fault handling, and diagnostic reporting. The drive controller also supports the safety functions defined by the IndraDrive M platform, such as Safe Torque Off, when configured with the appropriate control section and safety option. The integration of power and control functions in a single module reduces the number of separate components in the drive assembly while maintaining the modularity of the overall system.
The HMD01.1N-W0020-A-07-NNNN is intended for industrial servo axes that require a 20 A class drive controller within the IndraDrive M platform. Typical applications include packaging machinery, handling systems, assembly equipment, and general automation axes where compact drive dimensions and coordinated motion are important. The module’s role is to provide the power conversion and control functions for a single axis, while the IndraDrive M system supplies the shared DC link and communication infrastructure. Its design reflects the modular drive philosophy, in which individual axes can be configured and maintained as part of a coordinated machine drive system.



