The HVE04.2-W075N, identified by order reference 190002, is a supply module within the Rexroth Indramat System 200 modular drive family. It is responsible for converting the three-phase mains supply into a regulated DC link voltage that is distributed to the drive modules in the System 200 rack. The supply module is a central component of the multi-axis drive architecture, providing the electrical energy and the DC bus stability required by the connected servo drives.
The HVE04.2-W075N contains the rectifier, DC link capacitors, and monitoring circuits needed to establish and maintain the DC link voltage for the System 200 drive assembly. The W075N segment of the type code identifies the power class of the supply module, which determines the maximum continuous DC power that can be delivered to the drive modules. The supply module is connected to the three-phase mains through the appropriate line filter and contactor arrangement, and it provides the DC link voltage to the drive modules through the rack busbars.
The supply module monitors the mains voltage, the DC link voltage, and the load current. It detects abnormal conditions such as phase loss, overvoltage, and undervoltage, and it initiates a protective response when these conditions exceed the specified limits. The DC link capacitors store energy to smooth the rectified voltage and to supply the transient current demands of the drive modules during acceleration.
The HVE04.2-W075N is designed for rack mounting in a System 200 drive assembly. The rack provides the mechanical support and the busbar connections that distribute the DC link voltage to the drive modules. The supply module occupies a defined slot in the rack, and its front panel provides access to status indicators and configuration interfaces. The supply module communicates with the drive modules and the higher-level control system through the System 200 communication infrastructure, allowing the drive system to coordinate the power demand across multiple axes.
In a multi-axis system, the supply module’s power class must be selected to match the total demand of the connected drives, including the simultaneous acceleration of multiple axes and the regenerative energy returned during braking. The common DC link architecture allows energy from braking axes to be absorbed by accelerating axes, reducing the demand on the supply module and improving the overall energy efficiency of the machine.
The HVE04.2-W075N includes monitoring functions for the DC link voltage, the supply current, and the heat sink temperature. These functions protect the supply module and the connected drive modules from overload and abnormal operating conditions. The module also provides diagnostic information to the control system, allowing the machine operator or maintenance personnel to identify the cause of a fault and take corrective action.
The supply module’s thermal design accounts for the losses generated by the rectifier and the DC link components. The heat sink and cooling arrangement are selected to maintain the component temperatures within their permissible limits under the rated load profile. The module’s protection functions act on the supply stage to prevent damage in the event of a short circuit or a mains disturbance.
The HVE04.2-W075N is intended for industrial drive systems that use the System 200 modular platform and require a central DC link supply for multiple drive axes. Typical applications include machine tools, printing presses, packaging machines, and other production equipment where coordinated motion and energy sharing across axes are beneficial. The supply module’s role is to provide the electrical energy and the DC bus stability that the drive modules require, while the drive modules perform the motor control functions. As a member of the Indramat System 200 family, the HVE04.2-W075N follows the platform’s conventions for rack mounting, DC link connection, and communication, forming the power supply layer of the modular drive architecture.



