THQB21100 | General Electric 100 Amp Circuit Breaker

THQB21100 | General Electric 100 Amp Circuit Breaker

Product Description P/N: THQB21100 DESCRIPTION / SPECIFICATIONS Description The THQB21100 is a General Electric circuit breaker from the THQB Bolt-On Series. This device is a thermal-magnetic circuit breaker designed for residential and commercial applications. It features a two-pole (2P) configuration with a current rating of 100 amperes (100A) and a voltage rating of 240 volts (240V). The circuit breaker is equipped with bolt-on connectors for secure attachment to the bus connections of load centers and lighting panels. It has an interrupting rating of 10,000 amperes. 

The dimensions of the device are 3 inches in height, 2 inches in width, and 3 inches in length. The THQB21100 is an authentic General Electric product, CSA approved and UL listed. Technical Specifications Manufacturer General Electric Family THQB Bolt-On Series Catalog Number (Cat. No.) THQB21100 Alternate Number (Alt. No.) THQB2100 Poles 2 Current Rating (Amp) 100 Voltage Rating (Volt) 240 Connection Type Bolt-On Phase 1 Interrupting Rating 10,000 Amperes Dimensions (H x W x L) 3" x 2" x 3" Product Authenticity Authentic General Electric Product Certifications CSA Approved, UL Listed Information About THQB21100 

 The THQB21100 is a circuit breaker manufactured by General Electric, specifically within the THQB Bolt-On Series. This circuit breaker is designed for both residential and commercial applications. It is a compact, thermal-magnetic device, measuring 1 inch in width per pole. The device is equipped with bolt-on connectors, which are used to securely attach the breaker to the bus connections of load centers and lighting panels. The THQB21100 is classified under the catalog number THQB21100, with an alternate catalog number of THQB2100. This breaker is a two-pole (2P) unit, rated for a current capacity of 100 amperes (100A) and a voltage rating of 240 volts (240V). The connection type for this breaker is bolt-on, ensuring a stable and reliable connection to the electrical system. 

 This circuit breaker operates in a single-phase (1PH) configuration. It has an interrupting rating of 10,000 amperes (10kA), which indicates the maximum fault current it can interrupt without damage. The physical dimensions of the THQB21100 are 3 inches in height, 2 inches in width, and 3 inches in length. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required