TJJ436350WL | General Electric Molded Case Circuit Breaker
Product Description P/N: TJJ436350WL DESCRIPTION / SPECIFICATIONS Description The TJJ436350WL is a molded case circuit breaker manufactured by General Electric as part of the J600 Line. It belongs to the Type TJJ category and features three poles for three-phase applications. With a current rating of 350A and a voltage rating of 600V, it is suitable for high-power electrical systems. The circuit breaker has an interrupting capacity of 30kA at 480V, meeting standard interrupting capacity requirements.
Technical Specifications Part Number TJJ436350WL Manufacturer General Electric Family J600 Line Pole 3 Amp 350 Volt 600 Phase 3 Category Molded Case / 3-Pole Connection Feed-Thru Type TJJ Functions LI - Long-Time and Instantaneous Protection Thermal Magnetic AIC Ratings 30kA@480V Information About TJJ436350WL The TJJ436350WL is a molded case circuit breaker manufactured by General Electric as part of the J600 Line. It belongs to the Type TJJ category and is designed for three-phase applications, featuring three poles. With a current rating of 350A and a voltage rating of 600V, it is suitable for high-power electrical systems. The circuit breaker has an interrupting capacity of 30kA at 480V, meeting standard interrupting capacity requirements.
Equipped with line and load side lug terminals, the TJJ436350WL comes complete with a non-interchangeable trip unit. This trip unit provides protection against overcurrents and ensures the safe operation of electrical systems. Additionally, the circuit breaker is designed for reverse feed applications, offering flexibility in electrical installations. Operating at a maximum temperature of 40 degrees Celsius, the TJJ436350WL is suitable for use in various industrial and commercial settings. It is designed as a feed-thru circuit breaker, allowing for efficient wiring configurations. The thermal magnetic technology employed in its construction provides reliable protection against both thermal overloads and short circuits.
Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.
Features
Single slot CPU
Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program) Supports floating point calculations
Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
0.4 microseconds per boolean function
64 MHz, 80486DX2 microprocessor
Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only)
Programmed by MS-DOS, or Windows
software products running on Windows
95 or Windows NT
over Ethernet TCP/IP or through the SNP port.
Configurable data and program memory
Battery-backed calendar clock
Three position operation mode switch
Password controlled access
Remote programmer keyswitch memory protection
Four status LEDs
Software configuration (No DIP switches or jumpers)
Reference information inside front door
In-system upgradable firmware
email:1583694102@qq.com
wang@kongjiangauto.com