YOKOGAWA 701941/701942 Miniature Passive Probe

YOKOGAWA 701941/701942 Miniature Passive Probe

INTRODUCTION

This 701941/701942 miniature passive probe is designed for user’s safety and excellent easy-to-use operability. The probe tip utilizes a spring mechanism to minimize the stress applied to a device to be inspected. Additionally, this spring mechanism is also effective to prevent the probe tip from slipping on the board surface. In particular, the spring mechanism is useful when using the probe with it inclined. The probe tip is changeable. Replacement tips are provided in the accessory pack. For details about how to change the probe tip, see “Maintenance.” A wide variety of optional accessories is available upon request. To ensure correct use, please read this manual thoroughly before beginning operation. After reading this manual, keep it in a convenient location for quick reference in the event a question arises during operation.

Key Features and Specifications:

Compact design: this probe is known for its small size, making it easy to use in compact test environments.

Bandwidth and Voltage Range: Typically has a high bandwidth (e.g. 500MHz) to accurately measure high frequency signals. It also has an appropriate voltage range (e.g. 400V) to meet different testing needs.

High accuracy and stability: It is manufactured with high-quality materials and precision technology to ensure the accuracy and stability of measurement results.

WIDELY APPLIED: Suitable for signal measurement in electronics, communication, computer, industrial automation and other fields.

Precautions:

Before use, please read the product manual carefully to understand how to use the probe and precautions.

Make sure the connection between the probe and the oscilloscope is correct to avoid signal distortion or damage to the equipment.

During measurement, please avoid exceeding the rated voltage range of the probe to avoid danger.

YOKOGAWA 701942 Miniature Passive Probe

There is little direct information about the exact specifications and features of the YOKOGAWA 701942 Miniature Passive Probe, but based on the characteristics of Yokogawa Electric's other models of passive probes, it is reasonable to speculate:

Similar miniaturised design: similar to the 701941, the 701942 is likely to have a miniaturised design for portability and ease of use.

Similar bandwidth and voltage range: Although the exact values may differ, it is likely that the 701942 also has a high bandwidth and appropriate voltage range to meet the needs of different test scenarios.

High Accuracy and Stability: As a Yokogawa Electric product, the 701942 will also focus on the accuracy and stability of measurement results.

Wide range of applications: Like the 701941, the 701942 is suitable for signal measurement tasks in a number of industries.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.