ABB 3ASC25H203-12 DAPC 100-12; Control board, with CMT memory stick

ABB 3ASC25H203-12 DAPC 100-12; Control board, with CMT memory stick

Product Definition and Positioning

Model name: ABB 3ASC25H203-12 DAPC 100-12 Control Board (including CMT Memory Stick) Product positioning: Industrial automation core control unit, integrated CMT (Compact Memory Technology) memory stick, designed specifically for mid to high end industrial control systems, supporting complex logic control, real-time data processing, and convenient program management, suitable for industrial scenarios that require high reliability and flexible configuration.

CMT Memory Stick Core Features

1. Hardware level data carrier

Storage capacity: comes standard with 8GB industrial grade flash memory and supports up to 32GB expansion

Interface type: Dedicated high-speed interface, data read/write speed up to 15MB/s (read)/8MB/s (write)

Security features:

Hardware Encryption: AES-128 Data Encryption Protection

Anti misoperation: plug-in interface with mechanical locking device

Seismic design: comply with IEC 60068-2-6 vibration standard

2. System level functional integration

Program loading: Supports offline configuration file import/export, complete system program migration within 5 minutes

Firmware upgrade: Control board firmware version iteration through memory stick, supporting breakpoint resume function

Data backup: Automatic periodic backup of key parameters (such as PID control parameters, equipment calibration values)

Core technical parameters

1. Hardware specifications of control board

Processor: Freescale PowerPC MPC5553, with a clock speed of 400MHz, supporting floating-point arithmetic units (FPUs)

Memory configuration: 256MB DDR3 cache+1GB NAND Flash (onboard)+CMT memory stick expansion storage

Communication interface: Ethernet: 2 × 10/100Mbps (supports Modbus TCP, EtherNet/IP) 

Serial port: 3 × RS485/RS232 (supports Profibus DP) - Other: CAN 2.0B, USB 2.0 (only for CMT memory sticks)

I/O channel: Analog input: 8 × 16 bits (± 10V/4-20mA, supports cold end compensation)

Analog output: 4 × 16 bits (± 10V/4-20mA) - Digital input/output: 16 × 24V DC (optically isolated)

Working power supply: 24V DC (± 15%), power consumption ≤ 15W (including CMT memory stick)

Environmental adaptability: Temperature: -40 ℃~+70 ℃ (without cooling fan) 

Humidity: 5%~95% (without condensation) - Protection level: IP20 (panel installation), 

in compliance with IEC 61000-6-2 electromagnetic compatibility standard

2. Software functional parameters

Operating system: QNX Neutrino real-time operating system (RTOS), task scheduling accuracy ≤ 10 μ s

Programming support:

Compliant with IEC 61131-3 standards (LD/LAD, ST, FBD, SFC)

Support ABB Control Builder M engineering tool, compatible with third-party OPC UA servers

Data processing: Supports real-time data acquisition through 100+channels, with a minimum control cycle of 500 μ s

Core Control Function Architecture

CMT Memory Stick Workflow

Program deployment: Download the compiled control program to CMT memory stick through Control Builder M

System startup: After the control board is powered on, it automatically reads the configuration files (. cfg) and program files (. app) from the memory stick

Data exchange: Real time data during operation is synchronized to the memory stick according to the set cycle (1s~10min)

Fault recovery: When a system abnormality is detected, the latest valid backup data in the memory stick is automatically called up

Typical application scheme

Coordinated Control of Thermal Power Turbine

Configuration: Redundant deployment of 3 control boards, CMT memory sticks storing turbine start stop curves and load distribution strategies

Function:

Real time adjustment of valve opening (control accuracy ± 0.5%)

Memory stick automatic backup of PID parameters under variable load conditions

Support online modification of control strategies (through memory stick hot update program)

Intelligent warehousing and logistics system

Configuration: Single control board with dual CMT memory sticks (primary and backup redundancy)

Function:

Multi axis motion control (supporting 32 axis synchronization)

Memory stick stores coordinate data of each storage location and equipment calibration parameters

Quickly restore sorting system configuration through memory stick in case of malfunction

Installation and Maintenance Guide

1. CMT Memory Stick Operation Specification

Insertion/extraction: Be sure to operate in the power-off state, and hearing a "click" sound when inserting indicates that it is in place

Data backup: It is recommended to perform full backup through ABB Memory Tool software every week

Compatibility: Only supports ABB original CMT memory stick (part number: 3ASC25H205-01), third-party storage devices may cause system failure

2. Typical fault codes

E0101: CMT memory stick not recognized, check if the memory stick is securely inserted, restart the control board

E0203: Program checksum error, re download program to memory stick and restart system

E0315: Insufficient memory stick storage space, deleting outdated log files or replacing with a larger capacity memory stick

Industry standards and certifications

Electrical safety: compliant with IEC 61010-1 (pollution level 3)

Electromagnetic compatibility: EN 61326-1 (Class A for industrial environments)

Functional safety: Supports SIL 2 safety control (requires safety software package)