Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Data analysis of power generation structure transformation from "eleventh Five-Year Plan" to "Fourteenth Five-Year Plan"

F: | Au:佚名 | DA:2023-12-06 | 483 Br: | 🔊 点击朗读正文 ❚❚ | Share:


1. Steady growth in electricity production

1. Power generation trend

In 2021, the full-caliber power generation of 8.38 trillion kwh, an increase of 9.8%, and the power generation of 4.23 trillion kwh at the end of the 11th Five-Year Plan in 2010, nearly doubled. The trend of full-caliber power generation from 2010 to 2021 is shown in the figure below.

During the "12th Five-Year Plan" period, the average annual growth rate of full-bore power generation was 6.3%, 2011 continued the "11th Five-Year Plan" high growth rate, and began to slow down in 2012, 2015 by the impact of the year-on-year growth rate of light industry and heavy industry power consumption, power generation growth declined significantly, thermal power generation since the reform and opening up the first annual negative growth.

During the "13th Five-Year Plan" period, the average annual growth of full-caliber power generation was 5.9%, which was 0.4 percentage points lower than the average annual growth of the "12th Five-Year Plan". In the first three years of the 13th Five-Year Plan, power generation growth was high, the growth rate slowed down slightly in 2019, and it further slowed down in 2020 due to the impact of the epidemic, and it began to recover in 2021.

2, power generation installed trend

By the end of 2021, the installed capacity of full-caliber power generation reached 2.38 billion kw, an increase of 7.9% year-on-year, and a total increase of 146% compared with 970 million kw at the end of the 11th Five-Year Plan in 2010. The installed capacity of the main power generation types is: thermal power 1.30 billion kw(including coal 1.12 billion kw), hydropower 390 million kw(including pumped storage 36.39 million kw), nuclear power 53.26 million kw, wind power 330 million kw(including offshore wind power 26.39 million kw), solar power 310 million kw(including distributed 110 million kw). The trend of national full-caliber power generation capacity from 2010 to 2021 is shown in the figure below.

During the "12th Five-Year Plan" period, the installed capacity of full-caliber power generation increased by an average annual rate of 9.6%, which was 3.6 percentage points lower than the average annual growth rate of the "11th Five-Year Plan".

During the "13th Five-Year Plan" period, the average annual growth rate of full-caliber power generation capacity was 7.6%, which was 1.9 percentage points lower than the average annual growth rate of the "12th Five-Year Plan".

Generally speaking, after more than 30 years of rapid development of reform and opening up, due to the continuous expansion of the total scale of China's economy, the economic development speed after the "eleventh Five-Year Plan" has slowed down, and the development speed of the power generation industry has also slowed down.

Second, the power transformation trend is obvious

1. Development achievements of the 11th Five-Year Plan

Since the founding of our country, the power supply mainly depends on thermal power, followed by hydropower; Nuclear power and wind power started in the mid-1980s; Biomass and solar power generation began to develop during the 11th Five-Year Plan period. According to the national energy development "Twelfth Five-Year Plan" report, the achievements of the power generation industry during the "eleventh Five-Year Plan" period are mainly reflected in the protection of power supply, the development of clean energy and the implementation of energy conservation and environmental protection, which has laid a strong foundation for the development of the "Twelfth Five-Year Plan".

(1) Ensuring power supply capacity. At the end of the 11th Five-Year Plan in 2010, the total installed capacity of full-caliber power generation nearly doubled from the end of the fifth Five-Year Plan in 2005, reaching 970 million kw, ranking second in the world, with an average annual growth of 13.2%. Among them, the thermal power installed capacity reached 710 million kw (including 3.41 million kw biomass), an average annual growth of 12.7%, accounting for 73.5% of the total installed capacity, has been the most important power supply to ensure power supply in China.

2) Increase the proportion of clean energy. In 2010, the installed capacity of hydropower reached 220 million kw, ranking first in the world, with an average annual growth rate of 12.5%, and its growth rate is on par with that of thermal power. The installed capacity of nuclear power was 10.82 million kw, an annual increase of 9.6%; The installed capacity of wind power was about 30 million kw (only 1.26 million kw in 2005), with an average annual growth of 88.0%. In 2010, the grid-connected scale ranked second in the world. Solar power generation has just started, with an installed capacity of about 860,000 kw.

In 2010, the above-mentioned clean and low-carbon energy generation reached 83 million kwh (including biomass), accounting for 19.6% of the total power generation; The installed capacity of clean and low-carbon energy reached 261 million kw (including biomass), accounting for 26.9% of the total installed capacity, an increase of 1.9 percentage points compared with 2005, because the "eleventh Five-Year Plan" began to vigorously develop wind power, its proportion of total installed capacity increased by 3 percentage points on the basis of 2005.

3) Implementing measures for energy conservation and environmental protection. The power industry implemented the "big pressure on the small", the standard coal consumption per unit of thermal power supply decreased by 37 grams, and the proportion of desulfurization units continued to increase.

2. "Twelfth Five-Year Plan" analysis

China's energy development "Twelfth Five-Year Plan" clearly put forward the goal of "optimizing the energy structure" : the proportion of non-fossil energy consumption increased to 11.4%, the total installed power capacity reached 1.49 billion kw, of which the installed capacity of non-fossil energy reached 451 million kw (excluding biomass), accounting for 30% of the total installed capacity. The share of natural gas in primary energy consumption will be raised to 7.5%, and the share of coal consumption will be reduced to about 65%. In order to achieve the "12th Five-Year" goal, the power generation industry has accelerated the transformation of the energy structure.

Looking at the basic data of the power industry in the past 10 years, the first year of the "Twelfth Five-Year Plan" has ushered in an inflection point where the proportion of non-fossil energy power generation has climbed. In 2011, the total power generation reached 473 million kwh, of which thermal power generation reached 390 million kwh, accounting for 82.0% of the total power generation (excluding biomass), and non-fossil energy generation reached 85 million kwh, accounting for 18.0% of the total power generation (including biomass), taking this as a turning point. In the past 10 years, the proportion of non-fossil energy generation has increased year by year.

By the end of the "12th Five-Year Plan" in 2015, the total power generation of all caliber reached 574 million kwh, an average annual increase of 6.3% compared with the end of the "11th Five-Year Plan" in 2010. When the full-caliber non-fossil energy power generation reached 156 million kw, it nearly doubled compared with 2010, with an average annual growth of 13.6%, accounting for 27.2% of the total power generation, an increase of 7.7% over 2010, compared with the low point in 2011, the proportion of non-fossil energy power generation increased by 9.2% in the four years after the 12th Five-Year Plan.

By the end of the "12th Five-Year Plan" in 2015, the total installed capacity of full-caliber power was 1.53 billion kw, an annual increase of 9.6% compared with the end of the "11th Five-Year Plan" in 2010, and the increase was 3.7% lower than the "11th Five-Year Plan". Full-caliber non-fossil energy installed capacity completed 530 million kw (including 10.41 million kw biomass), an average annual growth of 15.2%, accounting for 34.8% of the total installed capacity, an increase of 7.8% compared with 2010. Both the total installed power capacity and the proportion of non-fossil energy installed capacity exceeded the targets set out in the 12th Five-Year Plan.

Non-fossil energy mainly includes power generation types: hydropower, nuclear power, wind power, solar power and biomass power generation.

3. Analysis of the 13th Five-Year Plan

China's energy development "13th Five-Year Plan" put forward the basic principle of "clean and low-carbon, green development", requiring the development of clean and low-carbon energy as the main direction of adjusting the energy structure, adhere to the development of non-fossil energy and clean and efficient use of fossil energy simultaneously. We will gradually reduce the proportion of coal consumption, increase the proportion of natural gas and non-fossil energy consumption, significantly reduce the intensity of carbon dioxide emissions and the level of pollutant emissions, optimize the distribution and structure of energy production, and promote ecological progress.

The plan determines the main target indicators of the power generation industry: the total installed power capacity reaches 2 billion kw, an average annual growth of 5.5%, the installed power capacity of non-fossil energy reaches 39%, and the proportion of non-fossil energy generation reaches 31%.

By the end of the "13th Five-Year Plan" in 2020, the total power generation of all caliber will be 763 million kwh, with an average annual growth of 5.8%, of which, when the power generation of non-fossil energy completes 258 million kw, the average annual growth rate will be 10.6%, accounting for 33.9% of the total power generation, exceeding the "13th Five-Year Plan" target by 2.9 percentage points. Compared with the end of the "Twelfth Five-Year Plan" in 2010, an increase of 6.7 percentage points, an average annual increase of 1.3 percentage points.

By the end of the "13th Five-Year Plan", the total installed power capacity will be 2.20 billion kw, exceeding the target of the "13th Five-Year Plan" by 200 million kw, with an average annual growth of 7.6%; The installed capacity of non-fossil energy completed 986 million kw, with an average annual growth of 13.2%, accounting for 44.8% of the total installed capacity, exceeding the target of the 13th Five-Year Plan by 5.8 percentage points.

4, power structure transformation contribution analysis

In order to unify the analytical caliber, the types of power generation mentioned in this paper are divided into five types according to the energy used: thermal power generation (using combustion fuel), hydroelectric power generation (using water energy), nuclear power generation (using nuclear fuel), wind power generation (using wind energy), and solar power generation (using solar energy). According to the nature of the fuel used, thermal power plants are divided into four types: coal-fired power generation, oil-fired power generation, gas-fired power generation, biomass power generation (including garbage power generation).

The above types of power generation (using abbreviation) are classified into five types according to non-fossil energy sources, including hydropower, nuclear power, wind power, solar energy and biomass; According to the classification of fossil energy including coal, oil, gas three types. Below we mainly analyze the transformation contribution of five types of non-fossil energy.

(1) Changes in installed structure: The installed capacity of hydropower, nuclear power, wind power, solar power and biomass in 2010, 2015 and 2020 and their proportion in the total installed capacity of non-fossil energy are shown in the figure below.

According to the data in the figure, the overall growth level of installed capacity of each type of power generation during 2011-2020 can be calculated: the average annual growth rate of hydropower is 5.5%, and the average annual growth rate of hydropower is 8.1% and 3.0%, respectively. The average annual growth rate of nuclear power is 16.5%, and the average annual growth rate of the preceding and following five years is 20.2% and 12.9%, respectively. The average annual growth rate of wind power is 25.3%, and the average annual growth rate of the preceding and following five years is 34.6% and 16.6% respectively. The average annual growth rate of solar power generation is 76.6%, and the average annual growth rate of the preceding and following five years is 117.8% and 43.2%, respectively. Biomass power generation has an average annual growth of 24.2%, and its five-year plan has an average annual growth of 25.0% and 23.5%, respectively.

(2) Changes in power generation structure: In 2010, 2015, 2020, hydropower, nuclear power, wind power, solar power, biomass five types of power generation and their proportion in the total power generation of non-fossil energy are shown in the figure below.

According to the data in the figure, the overall growth level of power generation of various power generation types during 2011-2020 can be calculated: the average annual growth rate of hydropower is 7.0%, and the average annual growth rate of hydropower is 10.1% and 4.0%, respectively. The average annual growth rate of nuclear power is 17.2%, and the average annual growth rate of the first and second five-year plans is 18.0% and 16.4%, respectively. The average annual growth rate of wind power is 25.2%, and the average annual growth rate of the preceding and following five years is 30.3% and 20.2% respectively. The average annual growth rate of solar power generation is 119.6%, and the average annual growth rate of the previous five years is 230.6% and 45.9%, respectively. Biomass power generation has an average annual growth rate of 23.7%, and its five-year plan has an average annual growth rate of 27.3% and 20.3%, respectively.

(3) Contribution analysis:

Installed capacity contribution: From the perspective of the average annual growth rate of installed capacity during 2011-2020, the above five types are sorted: solar 76.6%, wind power 25.3%, biomass 24.2%, nuclear power 16.5%, hydropower 5.5%. However, from the perspective of the proportion of installed capacity in the total installed capacity of non-fossil energy, taking 2020 as an example, its ranking is: hydropower 37%, wind power 29%, solar energy 26%, nuclear power 5%, biomass 3%.

Power generation contribution: From the annual average growth rate of power generation during 2011-2020, the ranking of the above five types is: solar 119.6%, wind power 25.2%, biomass 23.7%, nuclear power 17.2%, hydropower 7.0%. However, from the perspective of the proportion of electricity generation in the total power generation of non-fossil energy, taking 2020 as an example, its order is: hydropower 53%, wind power 18%, nuclear power 14%, solar energy 10%, biomass 5%.


  • Schneider TM258LF42DR PLC Controller
  • Harris 8800-00002-02 PLC Power Control Center
  • NLT NL8060BC21-11C 8.4 LCD Panel
  • ABB PLUTO S20 V2 CFS Safety PLC
  • Omron NS12-TS00B-V2 NS12-TS00B-ECV2 HMI
  • 7-29 10 00 A PLC Expansion Module
  • B&R X20DC2395 PLC Module
  • Omron NE1A-SCPU02 Network Controller
  • GE IC200UEX624-C VersaMax Micro PLC
  • Rexroth GIV50-11 Position Limit Switch Assembly
  • B&R X20SLX410 Safety Logic Module
  • Omron CJ1W-NC433 Position Control Unit
  • Inovance AM600-CPU1608TP PLC Controller
  • ABB Pluto S20 V2 CFS Safety PLC
  • Omron CJ1W-NC113 Position Control Unit
  • Grundig NEA02 AES 0 PLC I O Module
  • Fanuc A16B-2202-0432 Control PCB Board
  • Siemens 6SN1124-1AA00-0DA0 Simodrive LT Module
  • B&R X20AO2632 Analog Output Module Specifications
  • Georges Renault 6159187760 PLC Board Technical Guide
  • IDEC PLC FC6A-D32K3CEE MicroSmart Controller Manual
  • 6ES7226-6BA32-0XB0 Fail-Safe Digital Input Guide
  • Programmable Controller PLC EC20-4040BRA Specification
  • Grundig PLC NEA02 AES 0 I/O Card Specification
  • Seiki POS-M 10-22-01 Card Positioning Board Manual
  • Ormec Systems PMC960 Motion Controller CPU Guide
  • GEFRAN U16-NS 6YC000000000002 PCB Technical Specification
  • ABB SPAJ 140 C Overcurrent Relay Technical Manual
  • Omron NS5-MQ00B-V2 Touch Screen HMI
  • Siemens 6DP1280-8AB SIMADYN D Control Module
  • Schneider HJA36060U43X PowerPact H Breaker
  • WITTENSTEIN LP120X-MF2-50-1I1-3X-SPE Planetary Gear
  • Omron G9SX-GS226-T15-RT Safety Guard Relay
  • Omron CPM1A-40CDT1-D-V1 Programmable Controller
  • ABB ACH550-01-05A4-4 HVAC Drive 2.2kW
  • Schneider TSXDMZ28DT Modicon TSX Micro I/O Module
  • Siemens 6DL1131-6BH00-0EH1 ET200SP HA DI Module
  • B&R X20IF10E3-1 PROFINET IO Interface Module
  • Siemens QBE3000-D4 Transmitter
  • Inovance H3U-3624MT PLC Controller
  • Inovance AM600-CPU1608TP PLC Module
  • Omron NS8-TV00B-V2 NS8-TV00B-ECV2 HMI
  • Phoenix ILC 151 ETH PLC Module
  • National Instruments NI-9242 Analog Input Module
  • Fanuc A16B-3200-0521 Main Board
  • NLT NL8060BC26-35F 10.4 LCD Screen
  • Pilz PSEN cs1.1P 540050 Safety Switch
  • Keyence VT-SW4 VT-7SR Touch Panel
  • Siemens 6ES7 131-1BL11-0XB0 Digital Input Module
  • Mitsubishi RJ71EIP91 Ethernet IP Module
  • Siemens 3RW4047-1BB14 Soft Starter 55kW
  • Mitsubishi AJ71C21-A PLC Programmable Controller
  • NL8060BC21-06 8.4 Inch LCD Module
  • Siemens 6ES7215-1HG40-0XB0 PLC S7-1200
  • Siemens 3VA2463-5HL32-0AA0 630A Breaker
  • Saginomiya E-UJ-44030-B Control Board
  • Schmersal MV10H330-11y-M20-1348 Safety Switch
  • Fanuc A16B-1211-0301-04A Control Board
  • Siemens 6SN1123-1AB00-0AA2 LT Module
  • A100005506 Compair Delcos 3100 Control Panel
  • Omron ZFV-CA40 Smart Sensor Amplifier
  • Fanuc A16B-2200-0660 I O Board
  • Omron CJ1W-NC471 Position Control Unit
  • Siemens 6SN1112-1AA00-0AA0 Simodrive PWM Module
  • Mitsubishi GT2708 HMI Touch Panel
  • Siemens 3TK2834-1BB40 Safety Switch
  • INSYS EBW-E100 Industrial Ethernet Router
  • Schneider LC1F400 Contactor TeSys F
  • Mitsui RYP-51 PCB Control Board
  • Tamagawa TS2620N941E172 Encoder
  • Pilz PZE 9 Safety Relay
  • Omron C1000H-CPU01-V1 PLC
  • Siemens 6SL3210-1KE21-3UP1 Frequency Converter
  • Allen-Bradley 440E-L22BNSM Rope Pull Switch
  • ABB CI868K01 Interface Module
  • Stein Sohn E 083.1 PLC Rack
  • Mitsubishi GT2508-VTBD GT2508-VTBA HMI
  • ABB 3BSE018161R1 Module
  • CAREL ASD100 PGD1AY0I00 Operation Panel
  • ABB EK370-40-11 Contactor 220-230V
  • Eaton 9PX1500IRTM UPS 1500VA
  • NCV-20NGNMP Programmable Controller
  • Mitsubishi LE-40MTA-E Tension Controller
  • Fanuc A16B-3200-0429 Control Board
  • Mitsubishi GT2310-VTBA HMI Touch Screen
  • 3A99184G 1C31170G PCB Module Rev 10
  • Schneider 140NOM25200 Modicon Quantum Adapter
  • Mitsubishi NV400-SW 400A Circuit Breaker
  • Applied Materials 0190-51102 Heater Controller
  • Omron C200H-DA003 Analog Output Module
  • Yaskawa JANCD-YCP21-E DX200 CPU Board
  • IAI 12G2-60-250-P-L-C1-SP Intelligent Actuator
  • NLT NL8060BC21-11 8.4 LCD Screen
  • Omron NX502-1300 Controller Unit
  • ABB RVT-6 Power Factor Controller
  • Schneider TM258LF66DT4L PLC Controller
  • NLT NL6448BC26-27D 8.4 LCD Panel
  • NLT NL8060BC21-09 8.4 LCD Screen
  • Keyence XG-8700L Multi-camera Imaging System
  • EPC 50 3183045486 I O Motherboard
  • Nidec Emerson M701-054-00270A CT Drive
  • Therma Wave 18-011040 Controller Assembly
  • Mitsubishi Q03UDECPU PLC CPU Module
  • Allen-Bradley 2002-NX70-MWLINK PLC Module
  • AS-2P-60M-B Industrial PLC Cable
  • Yaskawa JANCD-YCP21-E DX200 CPU Board
  • PASABAN MC-2006 03 CAN PLC Card
  • Mitsubishi RJ71PB91V PROFIBUS DP Module
  • Fanuc A20B-8100-0137 PCB I O Board
  • D0-06DD2-D PLC Module DL06 PLC
  • Kepco BOP100-4M Power Supply Amplifier
  • Allen-Bradley 1785-L60B PLC-5 60 Module
  • Siemens 7MH4900-3AA01 Weighing Module
  • Pilz 773100 PNOZ m1p Safety Controller
  • Omron NS12-TS00B-V2 Graphic Operation Panel
  • EC20-4040BTA Programmable Controller PLC
  • Fanuc A16B-1212-0100-01 Power Unit CNC
  • Siemens 6ES7151-3BB23-0AB0 ET200S Interface Module
  • ATTO Control DU-01 PLC Display System
  • Keyence KV-RC8BXR Programmable Controller
  • Lenze GST04-1GVCK-063C22 Servo Motor
  • CKD AX9000GH AX9210H Control Unit
  • ABB PG6310 DC Trigger Control Board
  • Cutler Hammer 10316H621C Type L Device
  • TAIYO AA-277 EM CY TRIP PCB Card
  • Schneider BMXCPS2010 PLC Power Supply
  • Schneider TSXMRPC007M PLC PCMCIA Card
  • 101182218 Safety Stop Relay SSW301HV-230V