ADLINK MVP-5100 Fanless Industrial Control Computer Deployment and Development Guide

MVP-510A (i7 65W): idle 21W, processor fully loaded 127W, system fully loaded 144W, recommended adapter ≥ 160W.

MVP-5101 (i7 35W): 24W idle, 97W full load.

MVP-5102 (i5 35W): 22W idle, 94W full load.

MVP-5103 (i3 35W): 22W idle, 85W full load.

MVP-5104 (Celeron): idle 20W, full load 69W.

If PCI/PCIe expansion cards are installed, the heat and power consumption will significantly increase, and additional heat dissipation measures need to be considered. All models have a shutdown power consumption of less than 4W (standby).

Safety compliance and operational warnings

The manual repeatedly emphasizes the following safety red lines:

Lithium battery replacement: Incorrect model poses a risk of explosion and must be operated by authorized personnel.

Equipment installation environment: limited to information technology rooms (compliant with NFPA 75), not suitable for places where children may be present.

Grounding requirement: The power cord must be connected to a socket with protective grounding.

Hot surface warning: The surface of the chassis may be hot to the touch in high temperature environments, and it needs to be cooled before touching.

In addition, all I/O cable connections should be made in a power-off state. If you need to open the chassis (such as installing a CFast card), be sure to disconnect the power first.