EMERSON CSI 2130 Machinery Health ™ Analyzer

Motor current analysis: with MotorView in AMS Machinery Manager ®  Module coordination, using standard current clamps or patented magnetic flux monitoring, for non-invasive analysis of the rotor and stator condition of induction motors.

Specification parameters

Physical data: The color display screen is a 5.75 "x 4.25" transflexible LCD screen with backlight and a resolution of 640 x 480 pixels; The keyboard has large easy to press keys, 12 soft function keys, and context sensitive help keys; The dimensions are 8 "high x 1.88" deep x 10.25 "wide; Weight 4.5 lbs.

Operating conditions: Sealed casing, IP-65 protection level; The working temperature ranges from 15 to 113 º F (-10 to 50 ° C).

Power supply: Nickel hydrogen battery, 4.5 ampere hours, 7.2 V; typically used for 8 hours (longer when backlight is turned off), data can be saved when battery voltage is low; Equipped with an "intelligent charger" that can discharge, quickly charge, trickle charge, and also serve as a continuous power source; Charging time is 3 hours.

Quality assurance: NIST traceable calibration; There is a safety rating version approved for use in Class I, Zone II, Groups A, B, C, and D. The performance specifications of the safety rating version are the same as those of the standard model.

Safety certification: CSI 21302Q has obtained multiple safety certifications such as FM, CSA, ATEX, etc.

Analysis and routing specifications

Analysis experts: including various interactive data acquisition settings such as high-frequency, high-resolution, and bearing/gear fault analysis.

Data analysis speed: 400 lines/1000 Hz spectrum is 0.14 seconds/average; The 1600 line/1000 Hz spectrum is 0.5 seconds/average.

Analytical ability: noise floor PeakVue、 Demodulation SST、 There are corresponding performance indicators for dual channel, cross channel, and dynamic analysis; The signal range, frequency range, low-frequency response, resolution, average, average quantity, integration, triggering, anti aliasing and other parameters are also clearly defined.

Amplitude units: metric or imperial, acceleration, velocity, displacement, or user programmable.

Frequency units: Hz, CPM, Orders.

Scaling: Both the X and Y axes are linear or logarithmic.

Window: Hanning or Uniform.

Cursors: single cursor, harmonic cursor, moving harmonic cursor, edge band cursor.

Memory: 512 MB internal storage, equipped with a secure digital memory card slot, with almost unlimited memory.

Signal input: including power input, non power input, input impedance, tachometer, pseudotachometer, three-axis, output and other parameters.

Balance specifications

Basic mode: Provides pre configured tasks for balancing single and double planes, and a full calculator mode.

Advanced mode: up to 4 planes, up to 8 sensor inputs, up to 6 different speeds, automatic unit conversion, automatic weight distribution, trial weight estimation.

Special function: Vector averaging eliminates background vibration; The balance monitor automatically detects secondary mechanical faults; The graphical user interface provides data stability indicators, displays real-time imbalance vectors, and eliminates weight placement confusion.

Align specifications

Basic modes: automatic scanning (including partial scanning), manual 4-point, soft foot detection, thermal growth compensation, real-time machine movement, Jackshaft application, recording annotations and observation results, storing and calling jobs.

Advanced mode: Quick specification alignment checker, manual scanning, two-way mode (uncoupled axis), vertical machine alignment, C-plane alignment, straightness measurement, enhanced soft foot detection, data averaging, custom machine configuration, custom tolerance values, additional real-time movement options, uploading jobs to software.

Communication: Standard measurement via cable, no cable measurement, optional RF (where allowed).

Special features: thermal growth compensation, real-time machine movement, Jackshaft application, recording annotations and observation results.

Accessories Options

Including speed detection (such as CSI 430 laser speed sensor), three-axis accelerometer, proximity probe connection, structural analysis tool, power supply, cable, housing, screen protector, various sensors, adapters, current clamps, battery packs and other accessories, can be selected according to needs.