Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

ABB Freelance 2000 Instructions for Contrans I

F: | Au:FAN | DA:2025-04-02 | 957 Br: | 🔊 点击朗读正文 ❚❚ ▶ | Share:

ABB Freelance 2000  Instructions for Contrans I

Specification

Backplane Specifications

V17111 - 321, -322, -351 Backplane: 

16 Contrans I modules can be installed, capable of handling 32 Ex or non-Ex signals, supports redundant power supply. 

System connection 37-pin SUB D, rated voltage ≤ 30 V AC/DC; FSK bus interface with screw terminals for connection to a bus amplifier. 

Various electrical parameters and safety isolation features are available, e.g. isolation voltage up to 3.7 kV for system 

and field connection and corresponding isolation between module slots. 

Different types of field connection terminals are available to suit different installation requirements.

V17111 - 320 Backplanes: 

Connection to the control system via 3 x 37-pin SUB D jacks, specific signal outputs and inputs, support for HART-compatible CI modules. 

Supply voltage 19.2 - 30V DC with polarity protection and fuse monitoring. 

Resistance requirements for different input and output loads, various FSK bus connections, detailed galvanic isolation and test voltage parameters.

Digital Input Module Specifications

16-channel digital input module: Clear channel assignment when connected to Freelance DDI01. 

The modules are characterised by system power supply or field power supply, electrical isolation, fault monitoring, etc. 

Functional characteristics vary from model to model, and some support intrinsic safety.

16-channel Digital Input Module with Fault Signal: The channel assignment covers both signals and fault signals. 

The module features are similar to the 16-channel Digital Input Module, but with a more detailed design for fault monitoring and signalling.

16-channel digital input module with redundancy: connection and assignment of channels 0 - 15 and their redundant channels,

with redundancy functions and corresponding specifications in terms of system power supply and electrical isolation.32-channel digital input module:

Detailed channel allocation, the module's functional characteristics have commonality with other digital input modules as well as its own characteristics, 

suitable for specific application scenarios.


Digital output module specifications

16-channel digital output module: 

clear channel assignment for connection with Freelance DDO01, with system or on-site power supply, electrical isolation and other functions, 

different models of the module in the electrical characteristics and application scenarios.

16-channel digital output module with fault signals: 

clear channel assignment of output signals and fault signals, modules with special design for fault monitoring and signal transmission.

32-channel digital output module: the channel allocation is adapted to its functional requirements, 

and there are connections and differences with other digital output modules in terms of electrical characteristics and module applicability.


Analogue input module specifications

16-channel analogue input module: the channel allocation for connection with Freelance DAI01 is determined, supporting various input types, 

such as 4 - 20mA, RTD, TC, etc.. With electrical isolation, HART communication and other functions, 

different types of modules are suitable for different input conditions and application scenarios.

32-channel analogue input module: channel allocation involves the connection of two DAI01s, 

and the technical parameters and functional characteristics of the relevant modules support the realisation of multi-channel analogue input.

16-channel redundant analogue input module: 

Redundancy of the channels ensures the reliability of the signal inputs and matches 

the redundancy requirements in terms of module configuration and functionality.

16-channel analogue input module with event: the channel assignment is related to the event signal, 

and the functional characteristics of the module support the monitoring and processing of the event.


Analogue output module specifications

16-channel analogue output module: Fixed channel assignment for connection to Freelance DAO01, 

with output short-circuit protection, electrical isolation, etc., supporting HART communication, 

different modules are specified in electrical parameters and functional details.

32-channel analogue output module: channel allocation to achieve double 16-channel function, 

the relevant module in the output capacity and electrical characteristics to meet the needs of 32-channel output.

Other specifications: system cables for connecting different modules, binary and analogue signal cables, each with its own model and pinout; 

FSK bus amplifiers in 16-channel and 32-channel versions, with a limit on the number of backplane connections.


Technical features


Signal Matching and Processing Advantage: Contrans I is a wide range of interface programs, 

focusing on signal matching and processing, which can effectively interface with I/O boards of distributed control systems. 

It supports a wide range of signal types, both digital and analogue, and can achieve accurate matching and efficient transmission, 

which greatly improves the accuracy and stability of signal processing and ensures stable system operation. 

When dealing with complex industrial signals, it can optimise the processing of different types and strengths 

of signals to reduce signal interference and distortion.

Hardware design features


Separate design: Adopting the innovative design of separating the electronic function module from the junction box. 

In the installation process, the standard junction box is fixed on the DIN mounting rail to complete the wiring before inserting the function module,

 which greatly reduces the difficulty and probability of error and improves the installation efficiency.

Multiple Backplane Types: V17111-321, -322, -351 and V17111-320 backplanes are available. 

Each of these backplanes has its own characteristics in terms of signal processing capability, power supply mode, interface type, etc.

For example, some of the backplanes support redundant power supply, which can meet the diversified needs in different industrial scenarios.


Electrical isolation and safety features: excellent electrical isolation performance, in line with relevant safety standards.

 There are high isolation voltages between the system connection and the field connection, as well as between the module slots, effectively preventing electrical interference and guaranteeing system operation safety. Polarity protection and fuse monitoring are also provided to enhance the stability and reliability of the system.

Functional diversity


Abundant input and output modules: There are a variety of digital and analogue input and output modules,

 covering different channel numbers and functional characteristics. 

The digital input modules are available in 16-channel32-channel and other specifications, and some of them are equipped with fault signal monitoring and redundancy functions;

the analogue input modules support a variety of signal types, 

and the analogue output modules are equipped with short-circuit protection for outputs, which can satisfy the needs of various industrial control scenarios.


Supports HART and FSK buses: Compatible with HART and FSK buses, 

efficient communication is achieved through a pluggable FSK bus amplifier. 

Up to 100 16-channel or 50 32-channel backplanes can be connected,

 which facilitates data interaction with smart transmitters and other devices and enhances the intelligence of the system.

Convenience and cost-effectiveness


Easy to install: The unique plug-and-play design makes installation and maintenance extremely easy.

 When installing, there is no need for complicated wiring operations, just follow the process;

 when maintaining, directly replace the functional modules without rewiring, reducing maintenance time and costs.


Reduced system complexity: When used with Freelance 2000, the number of I/O boards can be reduced, simplifying the system architecture.

 It can be used as a cross-wiring/field terminal, reducing the complexity of system design and implementation, 

and improving overall system reliability and maintainability.



  • Rexroth HCS02.1E-W0028-A-03 CSH01.1C-PB Drive Package
  • Bosch Rexroth VT-VARAP 1-537-20/V0 Amplifier
  • Bosch Rexroth PPC-R02.2N R911285402 Control Unit
  • National Instruments PCI-7342 Motion Controller
  • National Instruments PXIe-6535 Digital I/O Module
  • National Instruments PCIe-6738 Analog Output Card
  • National Instruments NI-6583 Digital I/O Adapter Module
  • National Instruments NI TB-9214 Terminal Block
  • National Instruments NI 9222 Simultaneous Analog Input Module
  • National Instruments PXIe-8364 MXI-Express Module
  • National Instruments PXI-8185 Embedded Controller
  • National Instruments PCI-1405 Device
  • National Instruments SCXI-1160 Module
  • National Instruments PCI-MIO-16E-1 Device
  • National Instruments USB-6216 Device
  • National Instruments PXIe-2543 Module
  • National Instruments PCI-5102 Digitizer
  • National Instruments PXI-6284 DAQ Device
  • National Instruments PXI-7330 Controller
  • National Instruments cFP-2100 Controller
  • National Instruments USB-6002 DAQ Device
  • National Instruments PCIe-6374 Multifunction DAQ Card
  • National Instruments PXIe-4610 Power Amplifier Module
  • National Instruments PXIe-4154 Battery Simulator
  • National Instruments PXIe-7858R Reconfigurable I/O Module
  • National Instruments BNC-2090A BNC Terminal Block
  • National Instruments cRIO-9066 CompactRIO Controller
  • National Instruments 198944C-04L Ordering Part Number
  • National Instruments 157732A-02L Ordering Part Number
  • National Instruments TC-4353 Thermocouple Terminal Block
  • National Instruments 190996F-04L PCI-6250 DAQ Part Number
  • National Instruments PCI-7334 Controller
  • National Instruments TRC-8542 Cable
  • National Instruments CAP-1804 Accessory
  • National Instruments myRIO-1900 Kit
  • National Instruments PCI-AI16HR Board
  • National Instruments PCIe-6341 Device
  • National Instruments PXI-6514 Module
  • National Instruments PXI-6025E DAQ Card
  • National Instruments DAQPad-6015 Device
  • National Instruments BNC-2090 Accessory
  • National Instruments USB-4431 Dynamic Signal Module
  • National Instruments 181045-02 Ordering Part Number
  • National Instruments 779697-02 Ordering Part Number
  • National Instruments cFP-AI-112 Analog Input Module
  • National Instruments PCI-6602 Counter Timer Card
  • National Instruments NI-9871 RS485 Interface Module
  • National Instruments NI 9238 Voltage Input Module
  • National Instruments USB-6001 USB-6008 DAQ Devices
  • National Instruments PXI-6289 Multifunction DAQ Card
  • National Instruments PCI-7340 Motion Controller
  • National Instruments PCI-6036E DAQ Device
  • National Instruments USB-6002 DAQ Device
  • National Instruments NI-9201 Module
  • National Instruments SCXI-1531 Module
  • National Instruments 779351-01 Module
  • National Instruments PCI-6071E DAQ Device
  • National Instruments PCI-8512 Device
  • National Instruments NI 9375 I O Module
  • National Instruments PCI-8431/2 Card
  • National Instruments PXI-4472 Module
  • National Instruments PXI-6527 Digital Module
  • National Instruments PXI-7344 Motion Controller
  • National Instruments 779553-50 Ordering Part Number
  • National Instruments PXI-6040E Multifunction DAQ Module
  • National Instruments PCI-6013 Multifunction DAQ Card
  • National Instruments SCB-68 Shielded Connector Block
  • National Instruments PXI-7350 Motion Controller
  • National Instruments PXI-5142 Digitizer Oscilloscope Card
  • National Instruments 781157-01 Ordering Part Number
  • National Instruments cRIO-9057 CompactRIO Controller
  • National Instruments NI 9881 Module
  • National Instruments USB-8506/2 Device
  • National Instruments PCIe-8255R Device
  • National Instruments NI 9218 Module
  • National Instruments TB-2709 Terminal Block
  • National Instruments PXIe-1075 Chassis
  • National Instruments PCI-6254 DAQ Device
  • National Instruments FP-1000 Network Module
  • National Instruments 780876-01 Output Module
  • National Instruments PXI-6225 DAQ Module
  • National Instruments FW-7344 Motion Controller
  • National Instruments PCI-488.2 GPIB Interface Card
  • National Instruments PXIe-4300 Analog Input Module
  • National Instruments PXIe-8360 MXI-Express Interface
  • National Instruments SCXI-1120 Isolated Amplifier Module
  • National Instruments PCIe-6341 DAQ Device
  • National Instruments PXI-6723 Module
  • National Instruments PXI-5404 Source
  • National Instruments SH200LF Switch Cable
  • National Instruments PCI-6023E DAQ Card
  • National Instruments TB-4302C Terminal Block
  • National Instruments PXI-8430/2 Module
  • National Instruments 779892-02 Module
  • National Instruments QNET-04838 Actuator Board
  • National Instruments NI 9871 RS485 Interface Module
  • National Instruments PCI-6250 Multifunction DAQ Card
  • National Instruments cDAQ-9188 Ethernet Chassis
  • National Instruments PXI-5441 Arbitrary Waveform Generator
  • National Instruments MID-7604 Motion Interface Device
  • National Instruments FP-DO-403 Digital Output Module
  • National Instruments cRIO-9114 Reconfigurable Chassis
  • National Instruments SCXI-1126 Frequency Input Module
  • National Instruments 776572-60 Ordering Part Number
  • National Instruments PCI-7332 Motion Control Card
  • National Instruments NI-9217 RTD Input Module
  • National Instruments PCI-6023E Multifunction DAQ Card
  • National Instruments PXI-6650H Timing Module
  • National Instruments PXI-8196 Embedded Controller
  • National Instruments PXI-6528 Isolated Digital I/O Board
  • National Instruments PXI-6120 Simultaneous DAQ Card
  • ALSTOM 029.204 687 Digital I/O VME Board
  • National Instruments PXI-6509 Digital I/O Module
  • National Instruments FP-AI-112 Analog Input Module
  • National Instruments cRIO-9065 CompactRIO Controller
  • National Instruments PXI-2570 SPDT Relay Module
  • National Instruments PXI-5610 Module
  • National Instruments cFP-RTD-122 Module
  • National Instruments PXI-8336 Module
  • National Instruments NI 9237 Module
  • National Instruments PCI-6224 DAQ Card
  • National Instruments USB-6218 DAQ Device
  • National Instruments PCI-6601 Device
  • National Instruments SCXI-1124 Module
  • National Instruments USB-6525 DIO Device
  • National Instruments cDAQ-9189 Chassis
  • National Instruments PXIe-8394 MXI Module
  • National Instruments PXIe-4112 Power Supply