KEBA KeControl C1 CP 03x: Highly Integrated Embedded Industrial Controller

Storage temperature: -40 ° C~+70 ° C.

Relative humidity: 10%~95%, no condensation.

Anti vibration/impact: fully compliant with EN 61131-2 standard, suitable for installation next to injection molding machines and die-casting machines with strong mechanical vibration.

Typical application scenarios and process value

The design soul of the CP 03x series lies in reducing system costs and improving process performance. Taking injection molding machines as an example:

48 digital inputs can directly collect the status of doors, top pins, safety doors, and mold sensors;

56 digital outputs directly drive hydraulic valves, water pumps, and heating contactors;

4-channel analog differential input combined with 0-10V reference voltage, accurately reading the position of the electronic ruler;

6-way ± 10V analog output control servo pump or proportional valve;

4-channel 1A current output directly drives proportional pressure valve and proportional flow valve;

8-way isolated thermocouple input for real-time monitoring of barrel, nozzle, and mold temperature.

All I/O is completed within the same controller, with a control cycle as low as 1ms. Combined with KEBA's unique Fast Cut Off algorithm, it can achieve a turning point accuracy of 32 microns at injection speeds of hundreds of millimeters per second, significantly reducing burrs, shortening molding cycles, and reducing scrap rates.

In addition, CP 03x can also be applied to control the clamping force of die-casting machines, synchronize the multi-stage temperature and screw speed of extruders, and achieve dual closed-loop position/pressure in hydraulic presses.

Inheritance and Evolution: The Evergreen Tree of KeControl C1 Family

Although KEBA has launched new generation controllers such as KeControl C5 and KeDrive D3 based on Intel multi-core architecture and Linux FlexCore platform, the CP 03x series still holds an irreplaceable position in specific industries due to its ultimate integration, mature stability, and deep optimization of traditional hydraulic systems. It shares the same engineering design philosophy as the new controller and sets a benchmark in terms of I/O density, anti-interference ability, and direct drive capability.

For OEM manufacturers pursuing low cost, high reliability, and no need for frequent expansion, the KeControl C1 CP 03x series remains a highly competitive choice to this day.