Aerotech Ndrive HP 10/20/30 Series Digital Servo Drive
来源:
|
作者:FAN
|
发布时间 :2025-08-01
|
207 次浏览:
|
Share:
Suitable for brushless motors, brushed DC motors, and stepper motors, supporting full digital control of current loop, speed loop, and position loop, with a sampling rate of up to 20kHz.
Equipped with flexible redundancy design, supporting simplex, duplex, and triple module redundancy (TMR) systems, different levels of redundancy can be selected according to application requirements.
Provide rich I/O interfaces, including analog input/output, digital input/output, encoder feedback interface, etc., supporting high-speed user input (with a delay of about 50 nanoseconds).
Supports Position Synchronized Output (PSO)/laser triggering function, with a single axis triggering delay of 200 nanoseconds and a dual/three-axis triggering delay of 275 nanoseconds, enabling high-precision synchronous control.
Adopting IEEE-1394 (FireWire) ®) Communication bus, with a data transmission rate of 400Mbps, supports multi drive networking control, and can connect up to 32 axes.
Interface between joystick and handwheel: Instructions on how to connect single/dual axis joystick and handwheel for manual positioning, requiring calibration of analog input range.
Troubleshooting: List the causes and solutions of common faults (such as motor loss of control, driver alarm, overcurrent, overheating, etc.), provide information on the meaning of LED indicator lights, test point locations, fuse replacement, etc.
Preventive maintenance: It is recommended to check cable connections, cooling and ventilation, clean equipment every month to prevent liquids and conductive substances from entering the drive and ensure the normal operation of the equipment.
