Aerotech Ndrive series digital servo drives

Aerotech Ndrive series digital servo drives

Series Overview

The Ndrive series digital servo drive is a high-performance discrete drive option for the Automation 3200 motion system, featuring the following features:

Driving capability: It can drive brushless motors, brushed DC motors, and stepper motors, execute current loop and servo loop closure, and ensure high-level positioning performance and speed stability.

Processing capability: Equipped with a high-performance digital signal processor (DSP), it can perform complex calculations in real-time. The sampling rate of the digital current loop and servo loop can reach 20kHz, and it can also handle digital and analog I/O, laser triggering, and encoder multiplication.

Network and Expansion: Some models (such as HP and HL) have optional dedicated Ethernet ports that can communicate with I/O modules from third-party vendors; Support on FireWire ®  Combine usage online and customize the system as needed.

General options: including onboard encoder multiplier, three-axis position synchronous output (PSO), brake relay, additional I/O, absolute encoder interface, and independent logic power input for "keep alive" operation.

Power input: HP, HL, CP, and CL models accept AC input power, while MP models accept DC input power.

Special model: HL is a linear power amplifier suitable for low noise and ultra-high performance applications, meeting high bandwidth requirements, with excellent linearity and no cross distortion; CP is a high-performance PWM amplifier designed for cost sensitive applications; CL is a high-performance linear amplifier designed for cost sensitive applications, while CP and CL retain complex control architectures but eliminate support for optional features; MP is the smallest amplifier in the series, suitable for applications with ultra compact space requirements.

Comparison of Parameters for Various Models

Model Current Output (Peak/Continuous) Power Input Amplifier Type Motor Type Basic I/O Additional I/O (Beyond Basic I/O) Multi axis PSO Supports Third Party I/O Ethernet Capability "Keep Active" Function

Ndrive HP 10-150A/5-75A 2 or 3-phase AC PWM with brushed, brushless, stepper 4-channel digital output/6-channel digital input, 1-channel analog output/1-channel analog input, 8-channel digital output/8-channel digital input, 1-channel analog output/1-channel analog input supports single axis, dual axis, and three-axis

Ndrive HL 10-20A/5-10A 2-phase AC linear brushed, brushless, stepper 4-channel digital output/6-channel digital input, 1-channel analog output/1-channel analog input, 8-channel digital output/8-channel digital input, 1-channel analog output/1-channel analog input supports single axis, dual axis, and three-axis

Ndrive CP 10-30A/5-15A 2-phase AC PWM with brushed, brushless, and stepper 4-channel digital output/6-channel digital input, 1-channel analog output/1-channel analog input 16 channel digital output/16 channel digital input, 1-channel analog output/1-channel analog input only supports single axis absence

Ndrive CL 10A/5A 2-phase AC linear brushed, brushless, stepper 4-channel digital output/6-channel digital input, 1-channel analog output/1-channel analog input 16 channel digital output/16 channel digital input, 1-channel analog output/1-channel analog input only supports single axis none

Ndrive MP 10A/5A DC PWM with brushed, brushless, and stepper (no clear basic I/O data) 8-way digital output/8-way digital input, 1-way analog output/1-way analog input only supports single axis without any input

Detailed specifications for each model

Ndrive HP: Output voltage 100-320VDC, PWM switching frequency 20kHz, operating temperature 0-50 ° C, supports 1-3 phase AC input (50-60Hz, 115-240VAC), encoder input frequency can reach 200kHz (with onboard multiplier) or 40MHz LTT square wave, current loop and servo loop update rates are 20kHz and 1-20kHz respectively, options include "keep active"/auxiliary power supply, brake output, position synchronization output, etc. Different sub models have differences in peak and continuous current, weight and other parameters.

Ndrive HL: Output voltage ± 40VDC or ± 80VDC, operating temperature 0-50 ° C, storage temperature -30-85 ° C, supports single-phase AC input (50-60Hz, 115-240VAC), encoder input frequency and other parameters are similar to HP, and optional options include "keep active"/logic power input, brake output, etc. The parameters vary among different sub models.

Ndrive CP, CL, and MP: The working temperature of CP and CL ranges from 0-50 ° C, with CP output voltage of 100-320VDC, CL output voltage of ± 40VDC, and MP output voltage of 10-80VDC. The input power supply, encoder input frequency, update rate, and other parameters vary, and the available options also vary depending on the model.

Components and Dimensions

Each model has its own specific component configuration, such as the HP series including FireWire interface, Resolver interface (optional), power supply, and other components; The HL, CP, CL, and MP series also have corresponding components. At the same time, the document also provides detailed size parameters (including millimeters and inches) for each model and different configurations.