GE DS200SBCBG1A Brake Control Card

GE DS200SBCBG1A Brake Control Card

Part Number DS200SBCBG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS200SBCBG1A is a Brake Control Card manufactured and designed by General Electric as part of the Mark V Series used in GE Speedtronic Gas Turbine Control Systems. A Brake Control Card, in the context of automotive or engineering, refers to a specialized electronic component or module responsible for controlling the braking system of a vehicle. 

The card is typically a printed circuit board (PCB) that houses various electronic components and microcontrollers to manage the braking functions efficiently and safely. The main purpose of a Brake Control Card is to receive input signals from the vehicle's sensors, such as wheel speed sensors, brake pedal position sensors, and other relevant data. Based on this input, the card's microcontroller processes the information and activates the braking system accordingly. 

The card is equipped with various algorithms and safety features to prevent skidding, apply anti-lock braking (ABS) when needed, and distribute braking force optimally among the wheels to maintain stability and control during braking. Additionally, it may communicate with other vehicle control systems, such as the engine control unit (ECU) or the stability control system, to ensure coordinated operation and enhance overall safety. Certainly! Here are some common features and functionalities that you might find in a Brake Control Card: Sensor Inputs: The card typically receives input signals from various sensors, such as wheel speed sensors, brake pedal position sensors, brake pressure sensors, and other relevant sensors. 

These inputs provide crucial data for the card to determine the appropriate braking actions. Microcontroller: The Brake Control Card is powered by a microcontroller, which is the brain of the system. The microcontroller processes the sensor data and executes the control algorithms to manage the braking system effectively. Traction Control System (TCS): Some advanced Brake Control Cards include TCS features, which monitor wheel slip and adjust the braking force to optimize traction and prevent wheels from spinning on slippery surfaces. Electronic Stability Control (ESC): ESC is another important feature present in many Brake Control Cards. 

It continuously monitors the vehicle's stability and, if necessary, applies individual brakes to help the driver maintain control in emergency maneuvers or during challenging road conditions. Communication Interfaces: The card often has communication interfaces to exchange data with other vehicle systems, such as the engine control unit (ECU) and the vehicle's network bus (CAN bus). This allows for coordinated operation and sharing of vital information among various control units.

SPECIFICATIONS:

Part Number: DS200SBCBG1A
Manufacturer: General Electric
Series: Mark V
Product Type: Brake Control Card
Number of channels: 12
Maximum Lead Resistance: 15Ω
Operating temperature: -30 to 55 degrees Celsius
Size: 8.26 cm high x 4.18 cm
Frequency: 50 or 60 Hz
Repair: 3-7 Day
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.