DS3800DGPA1A1B | General Electric Programming Auxiliary Board Mark IV

DS3800DGPA1A1B | General Electric Programming Auxiliary Board Mark IV

Product Description P/N: DS3800DGPA1A1B DESCRIPTION / SPECIFICATIONS Description The General Electric DS3800DGPA1A1B is a generator gas turbine circuit card designed for the Speedtronic Mark IV turbine control series. This board functions as a daughter board, extending the circuitry of a larger circuit board, such as a motherboard or another secondary board.

 It operates as a line driver circuit card, which is an electronic amplifier used to drive loads like transmission lines. Technical Specifications Part Number DS3800DGPA1A1B Series Mark IV Speedtronic Turbine Controls Type Generator Gas Turbine Circuit Card Function Line Driver Circuit Card Role Daughter Board Capacitor Spaces Three cylindrical capacitors (C1 to C3), twenty-six small gold square capacitors Resistors Six rectangular blue resistors (R1 to R6), ten small cylindrical resistors (R12 to R21) Jumper Pins Twenty-nine gold jumper pins (1 to 29) Information About DS3800DGPA1A1B The General Electric DS3800DGPA1A1B is a generator gas turbine circuit card specifically designed for the Speedtronic turbine system series. This circuit card is an integral component of the Mark IV series of turbine controls developed by Speedtronic. 

 The DS3800DGPA1A1B functions as a daughter board. A daughter board is a subsidiary circuit that plugs into a larger circuit board, thereby extending the circuitry of the larger board. The larger board may be a primary circuit board, also known as a motherboard, or it may be another secondary board, such as an expansion or sound card. This specific circuit card serves as a line driver circuit card. A line driver is an electronic amplifier circuit used primarily to drive loads such as transmission lines, ensuring signal integrity over extended distances. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.