193X725AAG01 | General Electric Gate Pulse Generator Card

193X725AAG01 | General Electric Gate Pulse Generator Card

Product Description P/N: 193X725AAG01 Description / Specifications Description The 193X725AAG01 is a Gate Pulse Generator card manufactured by General Electric, intended for use in SCR Drive and Speed Variator Drive systems, which both utilize DC motors and power control units. The Speed Variator drive supports bidirectional operation, while the SCR drive is unidirectional. Technical Specifications Part Number 193X725AAG01 Manufacturer General Electric (GE) Application SCR Drive and Speed Variator Drive systems Drive Types SCR Drive (unidirectional), Speed Variator Drive (bidirectional) Front Panel Silver and blue; with four round openings and metal plugs Category PLCs/Machine Control Subcategory PC Board PLC/Add-On Board Weight 3.11 lbs Information About 193X725AAG01 The 193X725AAG01 is a Gate Pulse Generator card produced by General Electric for integration within SCR Drive and Speed Variator Drive systems. These systems are utilized for controlling DC motors, with the Speed Variator Drive being bidirectional and the SCR Drive being unidirectional. This card features a wide front panel constructed from silver and blue materials. 

The panel includes four round openings, each sealed with metal plugs. Behind one of these openings is a potentiometer, which is employed for circuit calibration purposes. The board's top edge is inscribed with the board number, designation, and the GE logo. On the bottom edge of the board, a looped handle is secured at two attachment points. The board is mounted to the PCB using two screws. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.