DS200TBQDG1A | General Electric RST Extension Analog Termination Board Mark V

DS200TBQDG1A | General Electric RST Extension Analog Termination Board Mark V

Product Description P/N: DS200TBQDG1A DESCRIPTION / SPECIFICATIONS Description The DS200TBQDG1A is a printed circuit board (PCB) designed for the Mark V Turbine Control System Series by General Electric. It is used in the management and control systems of wind, gas, or steam turbine automated drive assemblies. This board is part of the legacy GE Mark V Series, which utilizes Speedtronic control system technology. The DS200TBQDG1A PCB features 2 terminal blocks, each containing 107 terminals for signal wires.

 It includes multiple test points, 2 jumpers (BJ1 and BJ2), and 3 34-pin connectors. The jumpers are used to define the processing of the board to meet specific drive requirements. Each jumper has 3 pins, and their positions can be configured by covering different pins. Some jumpers are fixed and cannot be moved by the installer. Technical Specifications Part # DS200TBQDG1A Category PLCs/Machine Control Subcategory PC Board PLC/Add-On Board Weight 32.00 lbs Manufacturer GE General Electric Series Mark V Functional Description RST Extension Termination Board Functional Acronym TBQD PCB Coating Normal Coating Functional Revision A Information About DS200TBQDG1A 

 The DS200TBQDG1A is a printed circuit board (PCB) designed for integration into the Mark V Turbine Control System Series by General Electric. This board is intended for use in the management and control systems of compatible wind, gas, or steam turbine automated drive assemblies. The Mark V Series, which includes the DS200TBQDG1A, is recognized for its application in turbine control, though it is now considered obsolete as it represents a legacy product series discontinued following its initial release. 

 The DS200TBQDG1A PCB is a part of the later developments in the Mark V Series and utilizes Speedtronic control system technology. This technology, first introduced with the Mark I Series in the 1960s, represents the evolution of control systems used by General Electric. It is important to note that the DS200TBQDG1A is not the original product of its Mark V Series functionality; that distinction belongs to the DS200TBQDG1, which lacks the A-rated functional product revision of the DS200TBQDG1A. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.