DS3800NECA1B1A | General Electric Exciter Volt Control Board Mark IV

DS3800NECA1B1A | General Electric Exciter Volt Control Board Mark IV

Product Description P/N: DS3800NECA1B1A Description / Specifications Description The DS3800NECA1B1A is an Exciter Volt Control Board Mark IV. It is designed for controlling the excitation voltage in turbine control systems. The board features integrated circuitry for precise voltage regulation and signal processing. 

It supports standard industrial power inputs and is compatible with other components in the Mark IV Series for efficient control of exciter systems. Technical Specifications Condition New / Never Used Surplus Part Number DS3800NECA1B1A Product Type Exciter Volt Control Board Mark IV System Compatibility Mark IV (gas or steam turbine management) Components 12 LEDs (11 red, 1 amber) Category PLCs/Machine Control Subcategory PC Board PLC/Add-On Board Weight 0.56 lbs Information About DS3800NECA1B1A The DS3800NECA1B1A, manufactured by General Electric, is an exciter voltage control board designed for use with the Mark IV system. This system is intended for the management of gas and steam turbines, enabling automation of turbine control functions such as startup and shutdown. The DS3800NECA1B1A is marked for alignment along two edges and is populated with various resistors, diodes, and capacitors. 

The resistors are primarily ceramic-covered metal film, with varying values. Documentation for the DS3800NECA1B1A, including manuals and datasheets, was provided by General Electric. These documents are useful for troubleshooting and technical support related to the board's operation and maintenance. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. 

IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required