531X306LCCADM1 | General Electric LAN Communication Board

531X306LCCADM1 | General Electric LAN Communication Board

Product Description P/N: 531X306LCCADM1 DESCRIPTION / SPECIFICATIONS Description The 531X306LCCADM1 is a GE LAN Communication Board designed for network communication in industrial control systems. It provides connectivity for network communication and data exchange between control system components. The board includes standard communication interfaces and supports integration with other hardware in the system for efficient data transfer and communication. Technical Specifications Condition New / Never Used Surplus Part # 531X306LCCADM1 Category Drives Subcategory Drive Board Weight 0.55 lbs Description Type: DRIVE CONTROL BOARD Function LAN COMMUNICATION CARD Feature ADD-ON BOARD Display 16 DIGIT DISPLAY Information About 531X306LCCADM1

 The 531X306LCCADM1 is a LAN Communication display board manufactured by General Electric. This circuit board is relatively small in size and is designed for integration into larger systems. It features alignment markers, including letters A through F on one edge and numbers one through five on another edge, which are used to properly position the board within its designated slot in the system. The 531X306LCCADM1 is equipped with over twenty integrated circuits (ICs), also referred to as microchips or chips in technical documentation. These ICs are critical for the board鈥檚 functionality as they store and process information required for its operation. The board contains both erasable programmable read-only memory (EPROM) chips, which can be reprogrammed, and electrically erasable programmable read-only memory (EEPROM) chips, which cannot be reprogrammed. The board includes four connectors, both male and female, that facilitate its connection to surrounding circuit boards.

 In addition, the 531X306LCCADM1 incorporates multiple diodes to regulate the flow of electrical energy, capacitors to store and release energy as needed, and resistors to dissipate excess energy. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware