GE VMIVME-7700 Ultra Low Voltage Intel® Celeron® VMEbus

GE VMIVME-7700 Ultra Low Voltage Intel® Celeron® VMEbus

MICROPROCESSOR

— The VMIVME-7700 is  based on the Intel Ultra Low Voltage Celeron processor.  The enhanced Celeron processor has 256 KB of on-die L2  cache. The µFCBGA package processors offer thermal  characteristics that are well suited for embedded systems  operating over a wide range of temperatures.

DRAM MEMORY 

— The VMIVME-7700 accepts  one 144-pin SODIMM PC100 module for a maximum  memory configuration of 512 MB.

VIDEO GRAPHIC CONTROLLER 

— High  resolution graphics and multimedia-quality video are  supported on the VMIVME-7700 by an internal 815E AGP  graphics controller. A fully functional, integrated 2D/3D  graphics accelerator provides pixel processing and  rendering, with display resolutions of up to 1600 x 1200  supported. The video output is provided through the front  panel.

CompactFlash 

— The VMIVME-7700 includes a  CompactFlash socket on the assembly. The CompactFlash  may be configured as the boot device through the BIOS boot  device set up. The CompactFlash, as an ordering option, is  available up to 1 GB of storage space.

REMOTE ETHERNET BOOTING 

— The  VMIVME-7700 utilizes an Expansion ROM BIOS which  enables processor booting from a network server. The facility  supports PXE and a variety of network boot protocols  including BOOTP and DHCP (TCP/IP). 

UNIVERSAL SERIAL BUS (USB) 

— The  VMIVME-7700 provides front panel dual connection hub  host controllers for the USB. Supported USB features  include: isochronous data transfers, asynchronous  messaging, self-identification and configuration of  peripherals, and dynamic (hot) attachment.  

SERIAL PORTS 

— The VMIVME-7700 provides two  16550-compatible serial ports. Each serial port has an  independent 16-byte FIFO supporting baud rates up to  115 kbaud. Connection for both serial ports is provided by two micro DB-9 connectors located on the front panel. The  micro DB-9 connectors require two micro DB-9 to standard  DB-9 adapters, VMIC P/N 360-010050-001.

• Special features for embedded applications include: 

— Up to 1 GB bootable Flash on secondary IDE (optional) 

— Two 16-bit and two 32-bit programmable timers 

— 32 KB of nonvolatile SRAM 

— Software-selectable Watchdog timer with reset 

— Remote Ethernet booting 

— One PMC expansion site (IEEE-1386.1 PCI mezzanine card standard,  5 V) 

— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 — VMEbus interrupt handler, interrupter, and system controller 

— Includes real-time endian conversion hardware for little-endian and  big-endian data interfacing (patent no. 6,032,212) 

— Enhanced bus error handling 

— Passive heat sink 

— Real-time clock and miniature speaker included 

— Dual front panel universal serial bus (USB) connections

• Standard features include: 

— Up to 512 MB PC100 SDRAM 

— 100 MHz system bus via Intel 815E chipset 

— Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces 

— Ultra DMA/100 hard drive and floppy drive controllers (uses VMEbus P2  for connection to IDE/floppy) 

— Two high performance 16550-compatible serial ports 

— PS/2-style keyboard and mouse ports on front panel 

— VMEbus backplane interface 

— User programmable Watchdog timer 

— Passive processor heat sink