HONEYWELL XLS3000 Intelligent Addressable Fire Alarm System

HONEYWELL XLS3000 Intelligent Addressable Fire Alarm System

General 

The Honeywell XLS3000 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the XLS3000 is ideally suited for these applications. The XLS3000 is part of the XLS Series of products from Honeywell. The XLS3000 is ideal for virtually any application because it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs), the XLS3000 supports up to 3,180 intelligent addressable devices.

Features 

• Certified for seismic applications when used with the appropriate seismic mounting kit. 

• Complies with UL 2572 Mass Notification Systems (XLS3000 version 20 or higher). 

• One to ten isolated intelligent Signaling Line Circuits (SLC) Style 4, 6 or 7. 

• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See 74-5175. 

• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/3,180 per FACP or network node. 

 – Detectors can be any mix of ion, photo, thermal, or multisensor; wireless detectors are available for use with the XLS-WSG. 

 – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the XLSWSG. 

• Large 16 line, 640 character LCD backlit display or use display-less as a network node. 

• Network options: – High-speed network for up to 200 nodes (XLS3000, XLS140-2, XLS140, XLS120(C), XLS-NCA/-NCA2 Network Annunciator, or XLS-DVC-EM, and Honeywell Enterprise Buildings Integrator™ [EBI])

– Standard network or up to 103 nodes (XLS3000, XLS140- 2, XLS140, XLS120(C), XLS-NCA/-NCA2 Network Annunciator, or XLS-DVC-EM, and Honeywell Enterprise Buildings Integrator™ [EBI]). Up to 54 nodes when XLS-DVCEM is used in network paging. 

• Built-in Alarm, Trouble, Security, and Supervisory relays. 

• VeriFire® Tools online/offline program option. 

• With built-in Degraded Mode operation, the system is capable of general alarm if a fire alarm condition is present even if the central processing unit (CPU) fails. 

• 4,000 event history file in nonvolatile memory, plus a separate 1,000-event alarm-only file. 

• Alarm Verification selection per point, with automatic counter. 

• Autoprogramming, walk test, positive alarm sequence, and time scheduling. 

• Support for Eclipse Detector Protocol. 

• Backwards compatible with FlashScan and CLIP SLC devices. 

• Multiple central station communication options: 

– Standard UDACT – Internet – Internet/GSM 

• FM6320 approved Gas Detection System with TC809C1004 module and any FM listed gas detector. 

• EIA-232 printer port; EIA-485 annunciator port. 

• Honeywell SMART maintenance reporting.

ECLIPSE 

In addition to supporting FlashScan protocol, the XLS3000 also supports the new Eclipse device series and communication protocol from System Sensor. This technological introduction brings an advancement to the Honeywell XLS3000 that is yet unmatched in the industry in distributed processing and system response time.

Response 

Eclipse improves on the patented FlashScan protocol by further distributing the decision making process down to the device level. Eclipse sensors and alarm modules are able to broadcast their condition directly to the output devices on the same loop, eliminating the need for the control panel to process the alarm events and send individual output commands to the field devices. Output devices such as control modules are pre-programmed with response sequences stored directly in the field device. With this communication method, all output devices on a circuit can respond simultaneously to the alarm input within 250 ms of activation.