The CSH01.1C-S3-ENS-NNN-NNN-S2-S-NN-FW, part number R911328098, is a control section within the Rexroth IndraDrive CSH series. It is distinguished from other CSH variants by its Sercos III master communication interface, placing it in architectures where the drive is integrated into a Sercos real-time network. The control section handles motion command execution, encoder feedback evaluation, and safety functions for a single servo axis, while the associated power section performs the electrical conversion.
The S3 segment in the type code identifies Sercos III as the field communication interface. Sercos III is an Ethernet-based real-time bus that provides deterministic cyclic communication for motion control, with cycle times suitable for high-performance position loops. In the IndraDrive CSH context, the control section participates in the Sercos III ring or line topology, receiving command values from a master controller and returning actual position, velocity, and status data. The Sercos III interface supports both the real-time motion channel and a non-real-time channel for parameter access and diagnostics, allowing drive configuration and process data to share the same physical network.
The choice of Sercos III positions this control section for machines where the drive network is built around Sercos rather than PROFIBUS or other fieldbuses. The control section’s communication behavior is defined by the Sercos III protocol, including the cyclic data containers that carry position and velocity commands and the service channel used for parameterization. The S2 safety segment, present in this type code, adds Safe Torque Off functionality on top of the communication interface.
The ENS segment specifies the encoder evaluation variant. The control section supports IndraDyn S motor encoders as well as Hiperface absolute encoders, 1 Vpp sinusoidal signals, and 5 V TTL incremental encoders. This multi-format capability allows the drive to be commissioned with a range of motor feedback types without changing the control hardware. The encoder interface provides regulated power to the feedback device and processes the position and velocity signals for use by the drive’s control loops.
The NNN segments in the type code indicate that optional slots are unpopulated in this configuration. The control section therefore relies on the base encoder interface and the integrated safety function rather than on additional option cards for functions such as expanded analog I/O or supplementary communication ports. The NN designation for the safety module position, combined with the S2 segment, defines the safety configuration as Safe Torque Off without extended Safe Motion functions.
The CSH01.1C-S3-ENS-NNN-NNN-S2-S-NN-FW performs the core control functions of an IndraDrive axis: it closes the current, velocity, and position loops using feedback from the motor encoder; it executes motion commands received over Sercos III; and it manages the drive state machine, including enable, disable, and fault handling. The Safe Torque Off function provides a hardware-based path for removing torque from the motor when the safety circuit is interrupted, independent of the software control path. This dual-channel safety architecture supports machine designs that require reliable prevention of unexpected restart.
The control section also includes a standard control panel for local interaction, allowing basic drive functions to be accessed without a programming tool. The FW suffix indicates factory-loaded firmware, ensuring that the control section is delivered with a defined software baseline compatible with the Sercos III interface and the ENS encoder evaluation. When paired with a compatible power section, the CSH01.1C-S3-ENS-NNN-NNN-S2-S-NN-FW forms a single-axis drive that combines Sercos III communication, multi-format feedback evaluation, and integrated Safe Torque Off in one control section.
This control section is suited to machines where Sercos III is the designated drive network and where single-axis drives require flexible encoder support and a straightforward safety profile. The absence of populated option slots keeps the configuration focused on the core control and safety functions, with the Sercos III interface providing the primary path for motion data. In multi-axis systems, multiple CSH01.1C-S3 control sections can operate on the same Sercos III network, each managing its own axis while synchronized by the network’s cyclic communication.



