The PPC-R22.1, associated with order references 004566384 and 004566641, is a programmable motion control module within the Rexroth PPC-R series. It occupies the role of a central coordination unit for multi-axis machinery, executing motion programs, performing interpolation calculations, and managing the cyclic communication that synchronizes drive axes. The module belongs to the broader IndraDrive control ecosystem but is distinguished by its focus on multi-axis trajectory generation and motion logic rather than single-axis drive control.
The PPC-R22.1 is built around a PowerPC processor architecture, a choice that reflects the module’s intended workload: real-time execution of motion algorithms, interpolation of coordinated paths, and management of drive communication without the overhead of a general-purpose operating system. The controller runs dedicated motion firmware, identified within the PPC-R series as GPP10 or GPP11 depending on the configuration. This firmware provides the runtime environment for user motion programs, including positioning, synchronous control, cam profiles, and multi-axis interpolation.
The module is designed for rack mounting within the Rexroth RMB02.2 subrack, where it occupies a slot alongside other controller and communication modules. This modular rack architecture allows the PPC-R22.1 to be combined with additional function cards, such as fieldbus interfaces or encoder input modules, to adapt the controller to specific machine requirements. The backplane supplies the module with 24 VDC logic power, and the rack provides the mechanical and electrical infrastructure for the controller assembly.
Communication with servo drives is handled through a SERCOS fiber-optic interface. SERCOS is a deterministic real-time bus designed specifically for motion control, and the fiber-optic physical layer provides immunity to electromagnetic interference in industrial environments. The PPC-R22.1 uses SERCOS to exchange cyclic command and feedback data with compatible drive amplifiers, including members of the IndraDrive and EcoDrive families. The controller’s motion kernel generates position setpoints for each axis, and the SERCOS bus distributes these setpoints to the drives at the bus cycle rate.
The multi-axis synchronization capability of the PPC-R22.1 is central to its function. Coordinated interpolation requires that all axes receive their setpoints within the same bus cycle, with a known and stable time relationship. The controller’s firmware manages this synchronization, and the SERCOS protocol provides the deterministic timing infrastructure. For applications such as flying saws, electronic gearing, and multi-axis contouring, this synchronization is the foundation of motion quality.
The PPC-R22.1 executes user programs developed within the Rexroth motion programming environment. The firmware provides motion function blocks, axis management routines, and communication handlers that allow the machine builder to describe the desired motion sequence without directly programming the low-level drive interface. The controller also manages digital and analog I/O associated with the motion task, such as limit switches, reference marks, and enable signals. In configurations that include expansion modules, additional I/O and specialized interfaces can be integrated into the same control program.
The “FW” suffix in related PPC-R22.1 variants indicates factory-loaded firmware, ensuring that the controller arrives with a defined software baseline. The PPC-R22.1 is not a general-purpose PLC in the conventional sense; its programming model is oriented toward motion sequences and axis coordination, with logic control functions supporting the motion task rather than defining the primary control objective.
The PPC-R22.1 is intended for machines where multiple servo axes must move in a coordinated fashion under the direction of a single controller. Packaging machines, printing presses, converting lines, and specialized production equipment often fall into this category. The controller’s rack-mounted format and SERCOS drive interface align it with cabinet architectures in which a central motion controller coordinates distributed drive amplifiers. Its role is to provide the trajectory generation, synchronization, and motion logic that transform a machine sequence into coordinated axis motion.



