The MSK040C-0600-NN-M1-UG1-NNNN, part number R911306061, is a three-phase permanent magnet synchronous servo motor in the Rexroth IndraDyn S series. It is designed for industrial motion axes that require a balance of moderate torque, compact dimensions, and precise absolute position feedback. The type code identifies a 040 frame size, a 0600 speed class, an optical multiturn absolute encoder, a keyed shaft, and an integrated holding brake.
At standstill under the 60 K temperature rise condition, the motor delivers a continuous torque of 2.7 Nm with a continuous current of 3.1 A. Under the 100 K condition, the continuous torque rises to 3.1 Nm. The peak torque capability is 8.1 Nm at a peak current of 12.4 A, providing headroom for acceleration transients and overload events without exceeding the motor’s magnetic or thermal limits. The torque constant is 0.95 Nm/A, and the voltage constant at 20 degrees Celsius is 58.2 V per 1000 rpm. The winding resistance is 3.9 ohms, and the winding inductance is 21.3 mH. These electrical parameters define the motor’s terminal behavior and allow the drive’s current controller to be tuned for stable, high-bandwidth operation.
The motor uses natural convection cooling, relying on the machine structure and surrounding air for heat dissipation. This cooling method imposes no fan maintenance requirement and contributes to the compact envelope of the 040 frame. The winding insulation and thermal model are designed to support continuous duty at the rated standstill torque, with the drive monitoring the thermal state and limiting current if the temperature rise approaches the permissible limit.
The UG1 segment in the type code specifies an optical multiturn absolute encoder with a Hiperface interface. The multiturn capability means that the encoder retains both the position within one revolution and the number of revolutions across power cycles, eliminating the need for a homing sequence after shutdown. The Hiperface interface is a digital serial protocol that transmits absolute position data to the drive, and it is widely supported within the IndraDrive and compatible control platforms. The optical sensing principle provides high resolution and repeatability for precise positioning tasks.
The motor shaft is keyed, denoted by the M1 segment, providing a positive torque transmission interface for couplings, pulleys, and gears. The keyed connection is advantageous in applications with reversing loads or where friction-based clamping alone may not provide sufficient security. The motor includes an integrated holding brake, which is released when the drive is enabled and engages when the drive is disabled. The brake is intended for holding stationary loads, particularly in vertical or inclined axes, rather than for dynamic braking during motion.
The MSK040C-0600 is designed for operation with Rexroth IndraDrive drive systems. The motor’s winding data and encoder characteristics are recognized by the drive firmware, simplifying commissioning and ensuring that the current, velocity, and position loops are configured with the correct plant model. The four-pole-pair rotor construction produces a electrical frequency that is four times the mechanical rotation frequency, a relationship that the drive’s commutation algorithm accounts for when generating the stator current waveform.
The motor’s leakage capacitance and winding characteristics influence the high-frequency behavior of the drive-motor system, and the drive’s output filter and current control bandwidth are selected accordingly. The permanent magnet rotor produces a back-EMF proportional to speed, with the voltage constant defining the relationship between rotational speed and terminal voltage. At the maximum speed of 7500 rpm, the back-EMF and the DC link voltage of the drive determine the available torque through field weakening or voltage-limited operation.
The MSK040C-0600-NN-M1-UG1-NNNN is suited to industrial axes that require continuous torque in the range of 2.7 to 3.1 Nm, peak torque up to 8.1 Nm, and absolute position feedback without homing. The multiturn Hiperface encoder and integrated holding brake make the motor appropriate for vertical lift axes, tool changers, and positioning tables where position retention after power loss is important. Its compact 040 frame allows integration into machine structures with limited mounting space, while the keyed shaft accommodates standard mechanical transmission components. As part of the IndraDyn S family, the motor shares the feedback, thermal, and electrical conventions of the broader MSK range, supporting consistent engineering across multiple axes of a machine.



