The VT-VARAP1-537-20/V0, part number 0811405153, is an analog amplifier card within the Rexroth VT series for proportional hydraulic valves. It is designed to convert a low-power command signal into a regulated solenoid current, allowing a proportional valve to position its spool or adjust its flow in proportion to the electrical input. The amplifier card is a Eurocard-format module that mounts in a standard card rack, making it suitable for control cabinets in industrial hydraulic systems.
The VT-VARAP1-537-20/V0 provides the electrical drive signal for the proportional solenoids of a hydraulic valve. It accepts an analog command input, typically in the range of 0 to 10 V or 4 to 20 mA, and converts this signal into a pulse-width-modulated or linear current output for the solenoid. The amplifier includes current regulation circuitry that maintains the solenoid current at the commanded level despite variations in coil resistance and supply voltage, ensuring consistent valve response across the operating temperature range.
The card also includes ramp generation functions that limit the rate of change of the command signal. The ramp time can be adjusted to match the dynamic response of the hydraulic system, preventing sudden pressure or flow changes that could cause shock, vibration, or instability in the machine. The ramp function is particularly important in applications where the hydraulic actuator has significant inertia or where the load is sensitive to rapid motion changes.
The amplifier card provides adjustments for gain, offset, and current limit. These adjustments allow the card to be matched to the specific valve and solenoid characteristics, compensating for manufacturing tolerances and ensuring that the valve reaches its full stroke at the maximum command signal. The card may also include a dither signal generator, which superimposes a small high-frequency oscillation on the solenoid current to reduce hysteresis and improve the repeatability of the valve response.
The VT-VARAP1-537-20/V0 is designed for installation in a card rack with a backplane connector. The front panel provides access to adjustment potentiometers, test points, and status indicators, allowing the amplifier to be commissioned and serviced without removing it from the rack. The card’s electrical connections are made through the backplane, which carries the command signal, the solenoid output, and the power supply.
The amplifier card operates from a 24 VDC supply, consistent with the auxiliary voltage used in industrial control cabinets. The output stage is protected against short circuit and overload, and the card includes filtering to reduce the effects of electrical noise on the command signal. The Eurocard format and the card rack mounting provide a defined mechanical and electrical interface, allowing multiple amplifier cards to be installed in the same rack for multi-valve hydraulic systems.
The card’s thermal design relies on convection cooling within the card rack. The component layout and the heat sink area are selected to maintain the operating temperatures within the specified limits under the rated load conditions. The amplifier’s performance is specified for the industrial temperature range typically found in hydraulic control cabinets.
The VT-VARAP1-537-20/V0 is intended for hydraulic systems that use proportional valves for flow, pressure, or directional control. Typical applications include injection molding machines, presses, mobile equipment, and industrial automation systems where precise hydraulic motion is required. The amplifier card’s role is to provide the electrical interface between the machine control system and the hydraulic valve, converting the control signal into a regulated solenoid current and shaping the command profile through ramp and dither functions. As a member of the Rexroth VT amplifier family, the card follows the platform’s conventions for signal conditioning, current regulation, and card rack mounting.



