The MSK030C-0900-NN-M1-UP1-NSNN is a synchronous servo motor within the Rexroth IndraDyn S series. It is designed for motion axes that demand high dynamic response in a compact envelope, combining rare-earth permanent magnet rotor construction with a stator winding optimized for low inertia and efficient heat dissipation. The type code identifies a 030 frame size, a 0900 speed class, and a configuration that includes an absolute encoder, a keyed shaft, and a holding brake.
At standstill, the motor produces 0.9 Nm of continuous torque. The corresponding continuous current is 1.7 A under the 100 K winding temperature rise condition, reflecting the motor’s ability to sustain rated torque in continuous duty without exceeding thermal limits. The maximum speed is 9000 rpm, a characteristic that positions the MSK030C-0900 toward applications requiring rapid traverse and short positioning cycles rather than high torque at low speed. The torque constant is 0.58 Nm/A, and the voltage constant at 20 degrees Celsius is 35.6 V per 1000 rpm. These constants define the relationship between electrical input and mechanical output, allowing drive sizing to be matched to the motor’s magnetic design.
The rotor moment of inertia is low by construction, which contributes to fast acceleration and deceleration. This characteristic is particularly relevant in pick-and-place axes, indexing tables, and other motions where the load inertia is modest relative to the motor inertia. The motor is intended for operation with Rexroth IndraDrive drive systems, where the encoder interface and winding data are recognized by the drive firmware for automatic parameterization.
The UP1 segment in the type code specifies an absolute encoder. Unlike incremental encoders that require a homing sequence after power loss, an absolute encoder retains position information without external reference movement. This simplifies commissioning and improves restart behavior in machines where an uncontrolled referencing motion would be undesirable or unsafe. The encoder communicates through the drive’s encoder interface, and the absolute position data is available to the control section immediately upon power-up.
The mechanical interface includes a keyed shaft, denoted by the M1 segment. The keyed shaft provides a positive torque transmission path for pulleys, couplings, and pinions, reducing reliance on friction-based clamping in applications with reversing loads or vibration. The motor housing follows the compact MSK mechanical design, with mounting dimensions consistent with the 030 frame size. The holding brake is integrated into the motor and delivers a brake torque of 1.00 Nm. Its role is to hold the load stationary when the drive is disabled, particularly in vertical or inclined axes where gravity would otherwise cause drift.
The MSK030C-0900 relies on natural convection for heat removal under standard mounting conditions. The winding insulation system is designed to tolerate the temperature rise associated with continuous operation at rated torque. For applications with higher thermal demand, the drive system can monitor the motor thermal model and limit current accordingly. The three-phase winding is configured for connection to an IndraDrive power section, and the commutation is managed electronically by the drive using rotor position information from the absolute encoder.
The motor is a permanent magnet synchronous machine, and as such it requires a controlled current source with field-oriented control to achieve smooth torque production across the speed range. The IndraDrive platform provides this control, along with functions such as current limiting, velocity feedforward, and position loop closure. The electrical time constant of the winding, together with the drive’s current control bandwidth, determines the achievable torque response for dynamic moves.
The combination of 0.9 Nm continuous torque, 9000 rpm maximum speed, absolute feedback, and a holding brake makes the MSK030C-0900-NN-M1-UP1-NSNN suited to compact machine axes in packaging, electronic assembly, laboratory automation, and small handling systems. Its low rotor inertia favors applications with frequent acceleration and deceleration, while the absolute encoder reduces commissioning effort and supports safe restart behavior. The keyed shaft accommodates standard power transmission components without requiring custom shaft preparation. As a member of the IndraDyn S family, the motor shares the thermal, electrical, and feedback conventions of the broader MSK range, allowing it to be integrated into drive architectures that already use Rexroth servo technology.



