The PPC-R22.1N-N-Q1-NN-NN-FW is a rack-mounted motion controller within the Rexroth RECO modular controller family. It is configured as a plug-in CPU module for the RECO02 backplane and is intended for multi-axis motion applications that require synchronized trajectory interpolation, closed-loop position control, and deterministic drive communication. The type code specifies a headless configuration without an onboard operator panel, a Q1 analog acquisition submodule, and factory-loaded motion firmware.
The controller is built around a 32-bit PowerPC real-time CPU. This architecture is selected for deterministic execution of motion algorithms, including interpolation, position loop closure, and synchronization of multiple axes. The PowerPC core runs the motion firmware that transforms user-defined trajectory commands into cyclic setpoints for each drive axis. The real-time operating environment ensures that the setpoint generation and communication tasks complete within the bus cycle, maintaining the timing relationship required for coordinated motion.
The “N” segment in the type code indicates the absence of an onboard Ethernet interface. Communication with higher-level systems or programming tools is therefore handled through the rack backplane and any additional communication modules present in the RECO rack, rather than through a dedicated Ethernet port on the controller module. This configuration is appropriate for systems where network access is provided by a separate module in the rack or where the controller operates as part of a closed motion control subsystem.
Drive communication is provided through a SERCOS fiber-optic interface. SERCOS is a deterministic real-time bus designed for motion control, and the fiber-optic physical layer offers immunity to electrical interference in cabinets with high-power drive equipment. The controller uses SERCOS to exchange cyclic command and feedback data with compatible servo amplifiers, distributing position setpoints and collecting actual position and status information from each axis.
The NN segment in the type code indicates that the U3 and U4 expansion slots are unpopulated in this configuration. These slots are available in the RECO rack architecture for additional function modules, such as supplementary communication interfaces or encoder inputs, but the present configuration relies on the base SERCOS interface and the Q1 submodule for its I/O and communication requirements. The two expansion slots remain empty, keeping the module focused on its core motion control function.
The Q1 segment specifies the DAQ03 analog acquisition submodule. This submodule provides analog input capability for signals such as transducer outputs, reference voltages, or process feedback that must be incorporated into the motion control program. The DAQ03 is integrated into the controller’s I/O space and is accessible to the motion firmware, allowing analog signals to participate in control decisions alongside the digital position and velocity data exchanged over SERCOS. The Q1 option is particularly relevant in applications where an analog measurement, such as a tension or pressure signal, must be synchronized with axis motion.
The FW suffix indicates that the module is factory-loaded with motion firmware. This firmware provides the runtime environment for the controller’s motion and logic programs, including interpolation algorithms, axis management functions, and communication handlers for the SERCOS bus and the Q1 submodule. The controller’s role in the RECO rack is that of a central motion coordinator: it receives machine sequence commands, generates coordinated axis setpoints, distributes those setpoints over SERCOS, and monitors drive feedback to close the position loops. The PPC-R22.1N-N-Q1-NN-NN-FW is therefore a specialized module for multi-axis motion tasks in modular rack-based control systems, where its PowerPC core, SERCOS interface, and analog acquisition capability combine to address the deterministic requirements of coordinated drive control.



