The VCP08.2DTN-003-NN-NN-PW, part number R911311497, is a small operator terminal within the Rexroth VCP IndraControl family. It is designed to serve as the human-machine interface for industrial machines, providing a display and keypad through which operators can initiate functions, view process data, and respond to machine states. The terminal belongs to the VCP 08.2 generation, which is characterized by a compact front panel, a grayscale display, and a membrane keypad suitable for industrial environments.
The display is an FSTN (Film Compensated Super Twisted Nematic) panel with a resolution of 320 by 240 pixels. The display area measures 57.6 mm by 76.8 mm, and the panel renders five shades of gray. The FSTN technology provides contrast compensation across temperature variations, which is important in cabinets where the ambient temperature may fluctuate. The backlight has a half-life of 30,000 hours, defining the expected service interval for the illumination source. The display is intended for text and simple graphic presentation, consistent with the terminal’s role as a machine operating interface rather than a high-resolution visualization platform.
The front panel incorporates a membrane keypad with 39 keys. The keypad is constructed on a 5 mm thick aluminum plate with chamfered edges, providing a durable and tactile interface for operator input. The membrane surface is resistant to common industrial contaminants, and the front protection rating is IP65, meaning the panel is protected against dust ingress and water jets from the front. The rear of the terminal carries an IP20 rating, reflecting the protected environment inside the control cabinet. Fifteen status LEDs provide visual indication of machine states alongside the display.
The terminal is built around a RISC ARM9 CPU running at 200 MHz. This processor manages the display rendering, keypad scanning, communication handling, and application program execution. The system memory includes 512 KB of SRAM and 512 KB of SDRAM, while the application memory is 3 MB and the flash memory is 16 MB. The flash memory stores the operating firmware and the application project, while the application memory provides the runtime workspace for the operator interface program. The memory configuration is sized for dedicated HMI tasks rather than general-purpose computing, aligning with the terminal’s focused role in the machine control hierarchy.
The VCP08.2DTN-003-NN-NN-PW supports DeviceNet and PROFIBUS DP as fieldbus interfaces for connection to the machine controller. These interfaces allow the terminal to exchange data with the PLC or motion controller, receiving process values for display and transmitting operator commands back to the control system. The terminal’s connectors include D-SUB, Phoenix COMBICON, RJ45 female, and USB female types, providing physical access to the communication ports and auxiliary interfaces. The RJ45 connector is associated with the Ethernet-capable configuration options within the VCP 08.2 family, while the USB port supports local data transfer or peripheral connection.
The terminal operates from a 24 VDC supply. The current consumption is 0.25 A, the connected load is 6 W, and the maximum power consumption is 0.35 A. These figures define the electrical demand that the terminal places on the cabinet power supply and the thermal load that it contributes to the enclosure. The 24 VDC input is consistent with the auxiliary voltage conventions used across the Rexroth control and drive platform.
The VCP08.2DTN-003-NN-NN-PW is intended for machines that require a dedicated operator interface at the machine level, separate from the programming or visualization tools used during commissioning. Its IP65 front protection allows it to be mounted on the exterior of a control cabinet or on an operator console, where it may be exposed to dust and moisture. The grayscale FSTN display and 39-key membrane keypad provide a straightforward interaction model for functions such as start and stop commands, parameter selection, fault acknowledgment, and production data display. As a member of the VCP IndraControl terminal family, the panel integrates into the broader Rexroth control architecture through its DeviceNet or PROFIBUS DP interface, forming the human-machine layer of the automation system.



