Siemens 6ES7193-4CA40-0AA0 ET 200S Electronic Module

Siemens 6ES7193-4CA40-0AA0 ET 200S Electronic Module

Product Overview: Spare parts product, used for ET 200S electronic module (15mm wide), each packaging unit contains 5 TM-E15S26-A1 universal terminal modules, using screw terminals, with 2x6 terminal connections, can be connected to AUX1 and AUX1 is continuous.

Product Specifications

Dimensions: Width 15mm, Height 157mm, Depth 43mm.

Weight: Approximately 83g.

Classification code: Corresponding codes are available in classification standards such as eClass, ETIM, IDEA, UNSPSC, etc. For example, under multiple versions of eClass, it is 27-24-26-03, and under multiple versions of ETIM, it is EC001598, which facilitates product identification and classification.

Certification and Approval: Obtained multiple certifications and approvals, including general product approval, manufacturer declaration, CE certification, EMV certification, can be used in hazardous locations, and has also passed UL, CCC Ex, ABS, DNV, LRS, NK, CCS, IECEx and other certifications, suitable for various scenarios such as maritime applications, indicating that the product meets safety and quality standards of different regions and industries.

Functional Features

Diagnostic function: With powerful diagnostic capabilities, it can monitor and diagnose the real-time operation status of modules, input/output channel faults, etc., and provide diagnostic information feedback to the CPU for timely detection and resolution of problems.

Wire breakage detection: For analog input channels, it is possible to detect wire breakage in sensors or signal transmission lines and take corresponding measures, such as setting default values or triggering alarms.

Range setting: The range of analog input/output channels can be flexibly set through programming software to adapt to different sensors and actuators.

Calibration function: Supports regular calibration to ensure the accuracy of analog input/output and reduce errors caused by factors such as time and environment.

Application Fields

Manufacturing industry: used in production lines such as mechanical manufacturing and automobile manufacturing to collect analog signals such as temperature, pressure, and flow rate, and output control signals to adjust equipment operating parameters.

Process industry: such as chemical, power, metallurgy and other industries, to achieve precise control and monitoring of various analog parameters in the production process, ensuring the stability and safety of the production process.

Building automation: In intelligent buildings, it can be used to monitor and control analog parameters of air conditioning systems, lighting systems, and other equipment, achieving energy-saving and comfortable environmental control.

Precautions

Safety specifications are generally applicable to control system handling. Instructions and warnings related to a specific subject or operation of the product.

The following norms must be strictly observed:

  must strictly comply with the technical specifications and typical applications of the product system

  Personnel training: Only trained personnel shall install, operate, maintain or repair the product system. must

Provide guidance and explanation of the situation in danger areas to these personnel.

  Unauthorized changes: Changes or structural changes to the product system may not be made.

  Maintenance responsibility: Must ensure that the product system is used only under appropriate conditions and in full fitness for use.

 Working environment: The user must meet the specified environmental conditions:

Safety regulation

The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Verify that the installation is complete.

4 Ground and short-circuit the device.

Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must

Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.

Installation precautions

First, the importance of industrial equipment installation

In modern industrial production, various equipment and machines are widely used in various fields, such as manufacturing, energy industry, chemical industry and so on. The installation of industrial equipment is directly related to production efficiency and product quality. Proper installation and commissioning of good equipment can ensure the stable operation of the production line, improve production efficiency and product quality, reduce maintenance costs, and ensure the safety of employees.

Second, the steps of industrial equipment installation

1. Preparation: Before the installation of industrial equipment, it is necessary to carry out adequate preparation work. This includes the tools and equipment required for installation, cleaning and preparation of the installation site, and making installation plans and schedules.

2. Determine the installation position: Determine the installation position of the equipment according to the requirements of the equipment and the layout of the production line. When determining the location, the weight and size of the equipment need to be considered, as well as the coordination of the equipment with the surrounding environment.