ADLINK NuPRO-E43: PICMG 1.3 Core 7th Generation Industrial SHB

2. Memory support: DDR4's high bandwidth and high capacity

The NuPRO-E43 is equipped with two DIMM slots and supports dual channel DDR4 2133/2400 MHz non ECC memory, with a maximum capacity of up to 32GB. Compared to the previous generation DDR3, DDR4 provides higher bandwidth, lower power consumption, and larger single line capacity, which is crucial for industrial applications that require processing large-scale image data, running virtual machines or databases. The dual channel architecture further enhances memory bandwidth, ensuring that the CPU is not limited by memory bottlenecks under heavy computing tasks.

3. Comprehensive configuration of industrial grade I/O interfaces

The NuPRO-E43 fully considers the practical needs of industrial control systems and provides rich and flexible I/O interfaces:

Serial port: Provides 4 COM ports, all of which are led out through the onboard 2.0mm pin, facilitating customized cable connections. among which

Two are RS-232 standard ports.

Two configurable ports for RS-232/422/485, supporting Auto Flow Control for easy connection to industrial sensors PLC、 On site equipment such as frequency converters. This design enables it to simultaneously meet the needs of traditional serial port devices and new differential signal long-distance communication.

SATA storage: Provides 4 SATA 3.0 interfaces (6Gbps) and supports RAID 0/1/5/10 disk array modes. This is very practical for critical applications that require high-speed data throughput and data redundancy, such as real-time database servers and video surveillance recorders.

USB interface: Provides 8 USB 3.0 interfaces (2 on the rear I/O panel and 6 via onboard pins) and 4 USB 2.0 interfaces (leading to the backplane). The 5Gbps bandwidth of USB 3.0 can meet the needs of high-speed data backup and high-resolution industrial cameras and other peripherals.

Display output: Provides 1 VGA interface (rear I/O, up to 1920 x) 1200@60Hz ）And 1 DVI-D interface (led out through the onboard pin bank, up to 1920 × 1920) 1200@60Hz ）. The dual display output capability is suitable for HMI applications that require simultaneous display of the operating interface and monitoring screen.

Network interface: Two Gigabit Ethernet controllers onboard:

LAN1：Intel ®  I219LM PHY， Supports iAMT 11.0 remote management function and Wake on LAN (WOL).

LAN2：Intel ®  I225-V， Provide more advanced network features (such as partial support for time sensitive network TSN, depending on the specific SKU).

The dual port design supports network redundancy or physical isolation between the management network and the data network, and is a standard configuration for high availability in industrial systems.

Intelligent Management and System Monitoring: SEMA and AMT

1. ADLINK SEMA Management Solution

The NuPRO-E43 board is equipped with ADLINK's self-developed SEMA (Smart Embedded Management Agent) management solution. SEMA is a lightweight onboard management subsystem that provides the following core functions:

System health monitoring: Real time monitoring of CPU temperature, system temperature, system voltage (such as+5V,+12V,+3.3V, etc.), and CPU fan speed.

Remote management: supports remote system status query, logging, and fault warning through the network.

Customized services: SEMA provides open API interfaces that allow system integrators to integrate hardware health information into their own management software, achieving seamless integration with upper level applications.

This feature is particularly important for devices deployed in remote areas or unmanned sites, as it allows operations personnel to identify potential faults in advance (such as deteriorating heat dissipation and unstable power supply), enabling predictive maintenance and reducing unplanned downtime.

2. Intel iAMT 11.0

The Intel Active Management Technology 11.0 supported by the LAN1 interface further enhances remote management capabilities. Even in the event of an operating system crash or system shutdown, iAMT can still perform out of band management over the network, including:

Remote power control: remote power on, power off, and restart.

Serial redirection: Remote BIOS level configuration through LAN redirection of the system's serial port console.

System defense: It can detect and isolate infected clients to prevent malicious software from spreading in the network.

Onboard TPM and Security Features

NuPRO-E43 provides a TPM (Trusted Platform Module) module interface for installing Infineon TPM SLB 9665XT2.0 module. TPM 2.0 is a new generation hardware security standard that provides the following core security features:

Hardware key storage: Safely store encryption keys, digital certificates, and user passwords to prevent key theft at the software level.

Platform integrity measurement: During the system startup process, measure the hash values of critical boot components (such as BIOS, boot records, operating system kernel) and store them in TPM to detect whether the system has been tampered with.

Disk encryption support: In conjunction with software such as Windows BitLocker, it enables pre boot authentication and full disk encryption to protect static data security.