Welcome to the Industrial Automation website!

Product
Article
NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
HOME ⊙ ABB ⊙ ABB CP-E 24/1.25 Power supply
当前位置：

ABB CP-E 24/1.25 Power supply

来源: | 作者:FAN | 发布时间 :2025-05-15 | 685 次浏览: | 🔊 Click to read aloud ❚❚ ▶ | Share:

ABB CP-E 24/1.25 Power supply

Product Overview

ABB CP-E 24/1.25 Power Supply is a power supply designed specifically for industrial automation control systems, playing a key role as the "energy heart" of the entire automation system. It can convert input AC power into stable DC power, providing reliable power supply for various industrial automation equipment such as PLC (Programmable Logic Controller), sensors, actuators, etc. This power supply, with its stable performance, efficient conversion efficiency, and excellent protection capabilities, ensures the continuous and stable operation of industrial equipment in complex industrial environments, effectively reducing the risk of equipment failure caused by power issues, and improving the continuity and stability of industrial production.


Features
Rated output voltage 24 V DC
Output voltage adjustable via front‑face rotary potentiometer “OUTPUT Adjust”
Rated output current 1.25 A
Rated output power 30 W
Wide range input 100‑240 V AC (85‑264 V AC, 90‑375 V DC)
Typical efficiency of 86 %
Low power dissipation and low heating
Free convection cooling (no forced cooling with ventilators)
Ambient temperature range during operation ‑40...+70 °C
Open‑circuit, overload and short‑circuit stable
Integrated input fuse
Redundancy unit CP‑RUD offering true redundancy, available as accessory

Signalling output "DC OK" (Transistor) for output voltage OK

LEDs for status indication

Application
The primary switch mode power supply offers two voltage input ranges.
This enables the supply with AC or DC. Furthermore it is equipped with two generous capacitors, which ensure mains buffering of at least  30 ms (at 230 V AC).
That is why the devices can be used worldwide also in high fluctuating networks and battery‑powered plants
Operating mode
By means of the potentiometer „OUTPUT Adjust“ the output voltage can be adjusted within a range of  24 to 28 V DC.
Thus, the power supply can be optimally adapted to the application, e.g. compensating the voltage drop caused by a long line length.
The green LED „OUTPUT OK“ is lightening during operation.


Installatio

Mounting
The switch mode power supply can be snapped on a DIN rail according to IEC/EN 60715 as shown in the accompanying picture.
For that the device is set with its mounting rail slide on the upper edge of the mounting rail and locked by lifting it downwards.
Demounting
Remove the switch mode power supply as shown in the accompanying picture. For that the latching lever is pulled downwards by means of the screwdriver.
Alternatively you can press the unlock button to release the device.
Then in both cases the device can be unhinged from the mounting rail edge and removed.
Mounting position
The devices have to be mounted horizontally with the input terminals on the bottom. In order to ensure a sufficient convection, the minimum distance to other modules should not be less than 25 mm in vertical and horizontal direction.


Electrical connection

Connect the input terminals L and N.
The protective earth conductor PE must be connected.
The installation must be executed acc. to EN 60950, provide a suitable disconnecting device (e. g. line protection switch) in the supply line.
The input side is protected by an internal input fuse.
Rate the lines for the maximum output current (considering the short‑circuit current) or provide a
separate fuse protection.
We recommend to choose the cable section as large as possible in order to
minimize voltage drops. Observe the polarity.
The device is overload, short‑circuit and open‑circuit proof.
The secondary side of the power supply unit is electrically isolated from the input and internally not
earthed (SELV) and can therefore be earthed by the user according to the needs with L+ or L‑ (PELV).
Safety instructions and warnings
The device must be installed by qualified persons only and in accordance with the specific national
regulations (e.g., VDE, etc.). The devices are maintenance‑free chassis‑mounted units.
Disconnect system from supply network!
Before any installation, maintenance or modification work: Disconnect the system from the supply
network and protect against switching on.


Before start of operation:

Attention! Improper installation/operation may impair safety and cause operational difficulties or
destruction of the unit. Before operation the following must be ensured:
Connect to main according to the specific national regulations.
Power supply cables and unit must be sufficiently fused. A disconnecting device has to be provided
for the power supply to disengage unit and supply cables from supply mains if required.
The protective earth conductor must be connected to the terminal PE (Protection class I)
The secondary side of the power supply unit is not earthed and can be earthed by the user according
to the needs with L+ or L‑.
Rate the output lines for the output current of the power supply and connect them with the correct
polarity.
In order to ensure sufficient air‑cooling the distance to other devices has to be considered.
In operation:
Do not modify the installation (primary and secondary side)! High current! Risk of electric arcs and
  • Samsung D0C-16C Digital I/O Control Module
  • SAMWONTECH TLC990ME-83 Multi-Channel PID Controller
  • SanDisk SDP3B-10 Industrial Flash Storage
  • SAC IOP351 Advanced Processor
  • SAC IOP331 Input/Output Processor Technical
  • Saftronics EZ6 40 Soft Starter Manual
  • Sagemcom 252720938AB Signal Processor
  • Sagemcom 252721117AC Interface Module
  • Sagemcom 252721013AF Controller
  • SAIA PCD2.W610 Analog Output Module
  • SAIA PCD3.R60X Flash Memory Storage Module
  • SAT RM3141-01-02 CM3141-01-02 System
  • SAT CM3142-01-03 CX3147-04 Overview
  • SAT CM3141-02-03 CX3149-05 Technical Manual
  • Sauter AVM234SF132 Valve Actuator Specs
  • SBS PFSK165 3BSE027778R1 Technical Specs
  • SBS VIPC616 91611524 VME Carrier Board
  • SBS PMC-HS-SERIAL Interface Module
  • Schenck FNT-L001 Network Terminal Guide
  • Schenck VEG20400 Weighing Electronics Specs
  • Schiele DL42N-22 Multi-Function Relay
  • Schiele DL22N-22 Monitoring Relay Specs
  • Schleicher SSY52 Safety Control Unit Manual
  • Schleicher UST21 Control Module
  • SanDisk 336A4940EZP1 Industrial SSD
  • Sankyo PC10021 Industrial Control Module
  • SANMOTION PB3A003P200 Servo Drive
  • Sanyo P30B04010PCKST AC Servo Motor
  • Sanyo STNM-DR-250B Industrial Drive Module
  • Sanyo STNM-DR-160B Mixed I/O Module
  • Sanyo PMDAA1SFC20R Servo Amplifier
  • Sartorius MDB-5E Precision Weighing Module
  • SBS VIPC616 VME-IP Carrier Board
  • SBS 82002070 High-Performance Control Module
  • SBS P2-100BT-ER Industrial Ethernet Module
  • SBS 82002077 Industrial Control Module
  • SCANLAB INTELLISCANDE14-405NM UV Laser Scan Head
  • SCANLAB INTELLISCANDE14-1064NM IR Laser Scan Head
  • SCANLAB INTELLISCANDE III14-532NM Laser Scan Head
  • SCHAFFNER FN3416-110-35 EMI Power Line Filter
  • SCHROFF MPS015 Series
  • SCHROFF MPS015 13100205 Power Supply
  • SCHROFF 3BSC690076R5 Module Review
  • SCHUMACHER ATCS-15 1464-0320 Review
  • SCHUMACHER MDIA-162 System Analysis
  • SCHUMACHER ATCS-15 Technical Guide
  • Schumacher 1442-0010H Industrial Battery Charger Module
  • Seagate ST3630A 3.5 Inch IDE Hard Drive
  • SEC PB5F-DYL Latching Relay Output Module
  • SEC PB5F-DYI Isolated High-Density Output Module
  • SEC PB5F-DY High-Density Digital Output Module
  • SEC PB5-DY 5-Channel Digital Output Module
  • SEC PB4-DYI Isolated Digital Output Module
  • SEC PB4-DY 4-Channel Digital Output Module
  • SECO B161S-E176 Control Card
  • SEF M21.1 Control Module
  • Seidel MV65WKS-CE310/22PB Driver
  • SEM MT30R4-37 Servo Motor
  • SEMIKRON SKD62/16 Rectifier Bridge
  • SENTRON LD63F600 Circuit Breaker
  • Sentry VREL-11 Voltage Relay
  • Servo MTS30M4-38 AC Servo Motor
  • Servo Module SEVO BOARO C20003/2.1 Motion Control Board
  • Servoland SVFH8-H3-DSP*ANI Servo Drive
  • Servotecnica SVT57BL03-60V Brushless Servo Motor
  • SES 2422 Frequency to Analog Converter
  • SES 2409 Thermocouple Signal Conditioner
  • SES 2411 Industrial Signal Conditioner
  • SEW MDV60A0110-5A3-4-00 11kW Drive
  • SEW MPB51A055-503-00 Power Unit
  • SEW 31C055-503-4-00 5.5kW Inverter
  • SEW R37DS56L Geared Motor Specs
  • SEW MDV 8222215.14.17 Power Board
  • SEW MKS51A005-503-50 MOVIKIT Controller
  • SEW MHD093C-058-PG0-AN Synchronous Servo Motor
  • SEW MDV60A0075-5A3-4-0T MOVITRAC Frequency Inverter
  • SEW MDS60A0150-503-4-00 MOVIAXIS Servo Drive
  • SEW MDF60A-0075-5A3-4-00 MOVIFIT Drive
  • SEW MDF60A-0022-5A3-4-00 MDX60A0075-5A3-4-00 Drive System
  • SEW MDF60A-0022-5A3-4-00 MOVIFIT Drive
  • SEW EF-014-503 Braking Resistor
  • SEW DFP11B 8227241.12 Interface
  • SEW DFP 21A PROFIBUS Interface Card
  • SEW 31C450-503-4-00 45kW Inverter
  • SEW 31C075-503-4-00 7.5kW Inverter
  • SEW 31C015-503-4-00 1.5kW Inverter
  • SEW 31C005-503-4-00 Drive Analysis
  • SHINKAWA VM-5G0-2 General Purpose Monitor
  • SHINKAWA VM-5C Shaft Eccentricity Monitor
  • SHINKAWA VM-5Z4 Power Supply Module
  • SHINKAWA VM-5P3 Phase Reference Module
  • SHINKAWA VM-5H3 8-Slot Monitoring Rack
  • SHINKAWA VM-5Y1-02 GEM Process Monitor
  • SHINKAWA VM-5K Dual Vibration Monitor
  • SHINKAWA MP-2W2 Differential Expansion Monitor
  • SHINBORY DENSHI HD-522 Technical Guide
  • SHINKAWA MP-2P1 Industrial Vibration Monitoring Module
  • SHINKAWA MP-2P4 Multi-Channel Vibration Monitoring Module
  • SHINKAWA MP-2S Vibration Monitoring Module
  • SHINKAWA MP-2T Magnetic Pickup
  • SIEBEL IPS21-24V-35AD ABB Module
  • SIEBEL&SCHOLL IPS21-35AD Power Supply
  • SIEGER 05701-A-0550 Control Unit
  • SIEGER 05704-A-0122 Control Card
  • Siemens Moore 16114-171 I/O Module
  • Sigmatek DNC115 Digital I/O Module
  • Silicon Graphics B014ANT180 Graphics Card
  • Silicon Graphics 030-0730-003 VGA Graphics Module
  • SIMCO FMX-003 Electrostatic Field Meter
  • SHINKAWA MP-2S Vibration Monitoring Module
  • SINANO SE04-10WA Servo Driver Info
  • SIS AI3281 Analog Input Module
  • SIS CM01 Communication Module
  • SIS MC01 Main Controller Module
  • SIS DO3201 Digital Output Module
  • SIS DI3201 Digital Input Module
  • SIS BI01 Bridge Input Module
  • SIS PM01 Power Monitor Module
  • SKIIP 39AC12T4V1 IGBT Power Module
  • SLIMPAK 10923H5A Isolated DC-DC Converter
  • SLIMPAK G468-0001 Isolated Signal Conditioner
  • SLIMPAK G408-0001 DC-DC Converter
  • SLO-SYN M063-LE-507E Hybrid Stepper Motor
  • SMC VQ1-LPF04+VQ1100N-5 Valve Assembly
  • SMC INR-244-203B Technical Overview
  • SMC INR-244-97B-B-X5 Cooling System Info
  • SMC MHY2-10D2 Air Gripper
  • SNAP CB:2F:DA 8/4MB Memory Module