FLVOTEK MV10H DC/DC power supply
F:
|
Au:FANS
|
DA:2026-05-22
|
17 Br:
|
🔊 点击朗读正文
❚❚
▶
|
Share:
The MV10H series 10W DC/DC converter launched by FAVOTEK is an ideal solution designed to meet such demands. It adopts industry standard DIP 2 "× 1" metal packaging, providing a 2:1 wide input voltage range (5V/12V/24V/48V nominal input), single or dual output (3.3V to ± 24V), and has 1.5kV DC isolation, remote switch control, output voltage fine-tuning, and comprehensive electrical protection functions. This article will provide an in-depth analysis of the technical specifications, application circuit design, EMC rectification methods, and how to seamlessly replace discontinued modules of the MV10H series from an engineering perspective.
Intermittent shutdown of overcurrent or overheating protection triggered by the module to check if the load is short circuited; Improve heat dissipation and view the derating curve
Radiation exceeds the standard without using common mode choke and Y capacitor. Refer to Table 2 and add EMI filter
