DANAHER MOTION MB1256DN01-6Y / MB1256DN016Y

Core parameters

Power input: SmartStep is 90-120 VAC, SmartStep-240 is 100-240 VAC, both at 50/60 Hz, with a maximum of 500 VA.

Motor current: SmartStep0-7.9 A, SmartStep-240 0-3.9 A, incremental adjustment of 0.1 A.

System resolution: 36000 steps per motor rotation, supporting 2-phase hybrid permanent magnet stepper motors (0.9 °, 1.8 °, or 7.2 ° full step).

Protection function: equipped with short circuit, under voltage, over temperature, interlock, and regeneration/overvoltage protection.

Functional features: Supports encoder feedback to achieve stall detection and closed-loop operation, with Go Immediate Mode, can configure all system settings through software, provides RS-232 (optional RS-485) communication, compatible with application development software, equipped with 16 configurable I/O (8 inputs/8 outputs).

Optional accessories and modules

OPTO44/OPTO88 board: Supports up to 8/16 OPTO modules respectively, used for switching high voltage or current, parallel all I/O points to the second set of screw terminals.

**Breakout boards and cables: such as DB25BO (converting DB25 I/O connectors into screw terminals), SS-IO/SS-IO-6 (I/O cables), SS-RS232 (serial cables), etc.

Keyboard and Panel: FP220 is a programming and operator interface that supports menu driven settings, diagnostic, and tracking modes, with a protection level of NEMA 4 (IP65).

EMC compatibility kit: such as EMC-B8-1/B8-2 (for B8961/B8962), EMC-S6-1 (for SmartStep).

Product Selection

Example of Model Naming

D2403: 24V DC control, used for TN-D and TC2D.

B8961-30K: Single axis servo drive with 30K memory expansion.

SmartStep-240-RS485: 240V stepper controller with RS485 communication interface

Technical and Environmental Specifications

temperature range

Operating temperature: Most controllers range from 0 ° C to 50 ° C (32 ° F to 122 ° F), and SmartStep has a maximum ambient temperature of 50 ° C at a current setting of 6 A.

Storage temperature: -40 ° C to 85 ° C (-40 ° F to 185 ° F).

Humidity: 0% to 90% non condensing.

Protection level: Some accessories, such as FP220 panels, achieve NEMA 4 (IP65) when installed.

Model Supplement

DANAHER MOTION 60MB1296DU-18Y / 60MB1296DU18Y (BRAND NEW)

DANAHER MOTION 15M246U-3 / 15M246U3 (BRAND NEW)

DANAHER MOTION 15M146U-3 / 15M146U3 (BRAND NEW)

DANAHER MOTION MB1256DN01-6Y / MB1256DN016Y (BRAND NEW)

DANAHER MOTION 9T92A47 / 9T92A47 (BRAND NEW)

DANAHER MOTION MB1296DN01-3Y / MB1296DN013Y (BRAND NEW)

DANAHER MOTION TG10K259-C35X3 81 / TG10K259C35X38 1 (BRAND NEW)

DANAHER MOTION 146U-3 / 146U3 (BRAND NEW)

DANAHER MOTION TG10K259-A00X3 46 / TG10K259A00X34 6 (BRAND NEW)

DANAHER MOTION 2AB16ARBTL / 2AB16ARBTL (USED)