TEKTRONIX MSO5000B, DPO5000B series mixed signal oscilloscope

TEKTRONIX MSO5000B, DPO5000B series mixed signal oscilloscope

The current design of faster data rates and smaller timing margins requires oscilloscopes to have outstanding signal acquisition performance and analysis capabilities. The Tektronix MSO/DPO5000B series oscilloscopes not only have outstanding signal fidelity, but also provide bandwidth of up to 2 GHz and a sampling rate of 10 GS/s. They also have advanced analysis and mathematical operation functions, which can be enjoyed at any time. Can run Windows based on oscilloscope ®  The analysis software. Simply click on the visual trigger to easily capture complex signals. The MSO model includes 16 digital timing channels, and all models can decode common serial protocols, making it easy for you to fully understand your system.

Main Characteristics Analysis

Wave inspector ®  Control function, easy navigation and automatic search for waveform count

according to

Advanced trigger kit, standard with visual trigger and search

53 automatic measurements, with optional filtering functions, waveform mathematical operations, and

FFT analysis

Waveform histogram, eye diagram, TIE (jitter/timing) measurement and analysis

Using MATLAB, Visual Studio, and Excel for user-defined tasks

mathematical operations

Optional memory analysis, advanced jitter, serial data, power, and broadband RF

Main protocol features

Trigger and decoding options for medium speed (100 Mb/s to 1 Gb/s) bus

Trigger and decoding options for low-speed (10 Mb/s) bus

USB2.0、 One of Ethernet, USB power supply, MOST, and automotive Ethernet

Sexual testing options

Template testing on communication, computing, and video standards

Mixed Signal Design and Analysis (MSO Series)

16 digital channels (user upgradable)

MagniVu ™  High speed acquisition technology provides 60.6 ps on the digital channel

Fine timing resolution

Parallel bus automatic triggering, decoding, and searching

Set separate thresholds for each channel

Main performance indicators

Four bandwidth models: 2 GHz, 1 GHz, 500 MHz, and 350 MHz

Real time sampling rate of up to 10 GS/s on one or two channels, all channels

Up to 5 GS/s sampling rate

MultiView zoom ™  Up to 250 M point recording length

FastAcq ®  Acquisition technology, maximum waveform capture speed>250000 wfm/s

rate

FastFrame ™  Segmented memory acquisition mode with up to 290000 segments,

>310000 waveform/second capture rate

Standard 10 M Ω passive voltage probe, providing<4 pF capacitor load and

500 MHz or 1 GHz analog bandwidth

Vertical resolution>11 bits when using HiRes sampling

Users can choose bandwidth limits and DSP filters to reduce noise and improve efficiency

Frequency measurement accuracy

Core performance parameters (universal across the entire series)

1. Key parameters of simulation channel

Parameter category specification details

Bandwidth range: 100MHz, 150MHz, 350MHz, 500MHz, 1GHz, 2GHz (different models correspond to different bandwidths)

Sampling rate: all channels are turned on simultaneously: 2.5GS/s; Half channel open (e.g. 4-channel model with 2-channel open): 5GS/s (interpolated)

Record length for all channels: 400Mpts; Each channel is independent: 100Mpts (supports segmented storage, enhances long signal analysis capabilities)

Vertical resolution 8-bit (standard mode), 12 bit (high-resolution mode, enabled when sampling rate decreases)

Vertical sensitivity 2mV/div-10V/div (1-2-5 sequence, DC coupling); 10mV/div-10V/div (AC coupling, ≤ 10Hz)

The highest waveform capture rate is 1000000 waveforms per second (in sequence acquisition mode); Normal mode: 50000 waveforms per second

2. Digital channel parameters (only MSO5000B series)

Number of channels: 16 (in conjunction with TPP0816 digital probe);

Timing resolution: 62.5ps (high timing accuracy, suitable for high-speed digital signal timing analysis);

Threshold range: 0.8V-5.5V (supporting various logic level standards such as TTL and CMOS);

Triggering and analysis: Supports parallel bus triggering (such as 8/16 bit data bus), establishing/maintaining violation detection.

3. Time base and trigger parameters

Time base range: 500fs/div-1000s/div (1-2-5 sequence, covering from high-speed signals to slow changing signals);

Trigger types: edge trigger, pulse width trigger, code trigger, Zone trigger (area trigger, only triggers signals within the specified screen area), serial bus trigger (such as I2C address trigger, CAN ID trigger);

Trigger sensitivity: ≤ 10mV when bandwidth ≤ 500MHz (20MHz bandwidth limit enabled); When the bandwidth is greater than 500MHz, ≤ 20mV.

Key functional characteristics

1. Display and operation experience

Display screen: 12.1-inch capacitive touch screen (1280 × 800 resolution), supports multi touch (zoom, pan), adjustable brightness and contrast;

Operation method:

Physical controls: Wave Inspector knob (quick zoom/pan waveform), independent channel control buttons, shortcut keys (AutoSet, Default Setup);

Software features: Multi view display (simultaneously displaying time-domain, frequency-domain, and digital channel waveforms), custom interface (can hide redundant controls);

Interface language: Supports 10 languages including Chinese, English, Japanese, etc., to meet the needs of global users.