GE PACSystems RX7i Controller

|IC697MDL252 | 12 VAC input (32 points)|

|IC697MDL654 | 48 VDC input, positive and negative logic (32 points)|

|IC697MDL253 | 24 VAC input (32 points)|

|IC697MDL671 | Interrupt input module, 14 points|

|IC697MDL254 | 48 VAC input (32 points)|

|IC697VDD100 | 24 VDC source, 64 points, configurable as SOE (sequence of events) recording|

Discrete output

|IC697MDL340 | 120 VAC output, 2 amperes (16 points)|

|IC697MDL740 | 24/48 VDC output, 2 amperes, positive logic (16 points)|

|IC697MDL341 | 120/240 VAC isolated output, 2 amperes (12 points)|

|IC697MDL750 | 24/48 VDC output, 0.5 amperes, positive logic (32 points)|

|IC697MDL350 | 120 VAC output, 0.5 ampere (32 points)|

|IC697MDL752 | 12 VDC output, 0.5 amperes, positive logic (32 points)|

|IC697MDL940 | Relay output, signal, 2 amperes (16 points)|

|IC697MDL753 | 5/48 VDC output, 0.5 amperes, negative logic (32 points)|

|IC697VDR150 | Relay output, non blocking, 2 amperes (32 points)|

|IC697VDQ120 | Digital output, 64 points, 24 VDC 500 mA, current sink or source (64 points)|

|IC697VDR151 | Relay output, non blocking (64 points)|

Analog input

|IC697ALG230 | Voltage/Current, 8 Channels|

|IC697VAL216 | 0 to 5 VDC, 0 to 10 VDC, ± 2.5 VDC, ± 5 VDC, ± 10 VDC, 16 channels, jumper selectable with 16 bit resolution|

|IC697ALG440 | Analog Input Expander, Current, 16 Channels, Used in conjunction with IC697ALG230|

|IC697VAL232 | 0 to 5 VDC, 0 to 10 VDC, ± 2.5 VDC, ± 5 VDC, ± 10 VDC, 32 channels, jumper optional 16 bit resolution|

|IC697ALG441 | Analog Input Expander, Voltage, 16 Channels, Used in conjunction with IC697ALG230|

|IC697VAL264 | 0 to 5 VDC, 0 to 10 VDC, ± 2.5 VDC, ± 5 VDC, ± 10 VDC, 64 channels, jumper selectable with 16 bit resolution|

|IC697VAL132 | 0 to 20ma, 12 bit, 32 channel single ended or 16 channel differential|

|IC697VRD008 | RTD/Strain Bridge Module, supports 8-channel 100 ohm platinum resistance RTD or ± 30mV and ± 100mV voltage inputs, 12 bit plus sign bit|

|IC697VAL134 | 0 to 10 VDC, ± 5 VDC, ± 10 VDC, 32 channel single ended or 16 channel differential|

Analog output

|IC697ALG320 | Analog output, voltage/current, 4-channel|

|IC697VAL308 | Analog output, isolated, 8-channel, 12 bit, voltage bipolar ± 2.5 VDC, ± 5 VDC, ± 10 VDC|

|IC697VAL301 | Analog output, 12 bits, 32 channels 0 to 10 VDC, 0 to 5 VDC, ± 2.5 VDC, ± 5 VDC, ± 10 VDC|

|IC697VAL324 | Analog output, isolated, 4-channel, 12 bit, voltage polarity 0 to 10 VDC, 0 to 5 VDC|

|IC697VAL306 | Analog Output, 12 Bit, 16 Channel, Non Isolated, Voltage/Current Jumper Optional Voltage 0 to 10 VDC, 0 to 5 VDC, ± 2.5 VDC, ± 5 VDC, ± 10 VDC or Current 0 to 20mA, 4 to 20mA, and 5 to 25mA|

|IC697VAL314 | Analog output, isolated, 4-channel, 12 bit, current -4 to 20 mA|

|IC697VAL328 | Analog output, isolated, 8-channel, 12 bit, voltage polarity 0 to 10 VDC, 0 to 5 VDC|

|IC697VAL304 | Analog output, isolated, 4-channel, 12 bit, voltage bipolar ± 2.5 VDC, ± 5 VDC, ± 10 VDC|

|IC697VAL318 | Analog output, isolated, 8-channel, 12 bit, current -4 to 20 mA|

|IC697VAL348 | Analog output, 8 channels, 16 bits, voltage bipolar 0 to ± 10 VDC|

Communication module

|IC698ETM001 | RX7i Ethernet module 10/100, automatic sensing, automatic switching|

|IC697VRM015 | Reflective memory, 256Kbyte memory and 512 transmission FIFO, 170 Mbaud fiber network, supports up to 256 nodes, distance of 2000 meters|

|IC697CMM711 | Serial communication coprocessor, supporting CCM, RTU, SNP, and SNPx protocols|

|IC697RCM711 | Redundant Communication Module (Hot Standby)|

|IC698RMX016 | RX7i redundant memory swapping module, 16 Mbytes reflective memory|

|IC698CMX016 | RX7i Control Memory Swap Module, 16 Mbytes Reflective Memory|

I/O interface module

|IC687BEM731 | VME Single Slot Bus Controller|

|IC697BEM731 | Genius I/O Bus Controller|

|IC697BEM711 | Bus receiver (required for each local expansion rack)|

|IC697BEM733 | Genius Remote I/O Scanner|

|IC697BEM713 | Bus transmitter|

Special function module

|IC697HSC700 | High speed counter|

|IC697PCM711 | Programmable coprocessor|

|IC697VHD001 | Single Slot VMEbus Hard Disk Module|

|IC697VSC096 | Single Slot Celeron Socket 370 Processor Based on VMEbus Single Board Computer|