GE VME-3122A High Performance 16 Bit Analog to Digital Converter (ADC)

GE VME-3122A High Performance 16 Bit Analog to Digital Converter (ADC)

Basic Information

Product Name: VME-3122A High Performance 16 Bit Analog to Digital Converter (ADC) Board

Production company: GE Fanuc Intelligent Platforms

Main features

64 different or single ended inputs

16 bit analog-to-digital (A/D) conversion

Software selectable conversion rate (maximum 100kHz)

Programmable options for scanning channels 1, 8, 16, 32, or 64

Continuously digitize the selected input channel and store the results

Three triggering modes: software triggering, external triggering, and interval timer triggering

Three scanning modes: automatic scanning, single scan, and random access

Programmable VME interrupt

User programmable interval timer

Software programmable gains 1 and 10

External triggering can synchronize multiple boards simultaneously

Jumper selectable A/D range: 0 to+5V, 0 to+10V, ± 2.5V, ± 5V, and ± 10V

Optional low-pass filter

Over voltage protect

1024 word data buffer (16 word deep buffer x 64 channels)

Optional output encoding

When powered on, it is in automatic scanning mode with a gain of 1

Application Fields

Factory automation and instrumentation

process control

laboratory instruments

Machine monitoring

data acquisition

Ordering Options

Option Description

A (input filter option) 0=no filter; 1=10Hz（-3dB）； 2=50Hz（-3dB）； 3=100Hz（-3dB）； 4=500Hz（-3dB）

B (channel quantity option) 0=64 channels high performance; 1=32 channels high performance; 2=16 channels high performance

C (input option) 0=differential analog input channel with 96 pin non latch connector; 1=Single ended analog input channel with 96 pin non latch connector; 2=Differential analog input channel with 64 pin latch connector; 3=Single ended analog input channel with 64 pin latch connector

DE 0 (reserved for future options)

F (Special Sales Order) 0=Standard VME front panel without conforming coating; 1=Reserved; 2=Standard VME front panel with conforming coating

Connector data

Recommended style for connecting components P3 and P4 I/O connectors

64 pin IDC mating connector (64 pin) Panduit 120-964-435

Strain relief (applicable to 64 pin connectors) Panduit 100-000-072

96 pin discrete mating connector (96 pin discrete) AMP 925486-1

Female crimping contact (96 pin discrete) AMP 530151-6

Connector housing (suitable for 96 pin connectors) Harting 09 03 096 0501

96 pin IDC mating connector (96 pin large-scale termination) ERNI 913.031

0.033-inch ribbon cable (96 pin large-scale termination) ERNI 913.049

Strain relief insert (0.033-inch ribbon cable) Harting 09 02 000 9912

Connector housing (suitable for 96 pin connectors) Harting 09 03 096 0501

PC board I/O connector part number Panduit 101-096-033A

Functional characteristics

1. Working mode

MODE

Software trigger: Start the selected scanning mode by writing the software trigger address

External trigger: The external trigger received on the P2 connector initiates the selected scanning mode

Interval timer trigger: Start the selected scanning mode each time the programmed time interval expires

SCAN

Automatic scanning: default scanning mode, all active channels are scanned continuously in order

Single scan: Start a single data burst (scanning all selected channels) from the selected trigger mode, stop and wait for another trigger after scanning all selected channels

Random access: Each time the selected trigger mode is enabled, a single channel can be selected, digitized, and stored

Channel automatic gain: The unique gain code for each channel is loaded from VME into the gain buffer, and the allocated code is retrieved in real-time from the buffer during each channel acquisition

Synchronization: A single scan or burst can be initiated by an external TTL trigger through the P2 connector (external trigger) or a local trigger through the control and status register (CSR) (software trigger), and any event will generate a P2 trigger output, which can be used to synchronize up to 15 cards

2. VME related characteristics

VME access: The response to the address modifier can be selected as A32, A24, or A16 address space through jumper wires; Monitoring or user privileges, or both

VMEbus compliance: Compliant with VMEbus specifications ANSI/IEEE STD 1014-1987, IEC 821 and 297, with 6U external dimensions

VME interrupt: An interrupt request can be generated at the end or in the middle of a buffer scan, or it can be initiated after collecting a specific number of samples (1 to 65535), and the response vector is controlled through the interrupt vector register

Data ready flag: When the data buffer is full (end of scan) or half full (middle of scan), the data ready flag in CSR is set

Interval timer: Programmable interval timer provides a time interval of up to 687 seconds

3. Reset operation

Board reset response system reset or writing software reset address

The reset operation automatically establishes the following default conditions: automatic scanning mode, 64 channel block size, 64 channel data buffer, channel gain=x1, 100kHz conversion rate

ADC will undergo a calibration cycle under any reset condition, which takes 41ms after the reset operation is initiated

4. Other functions

PGA: Channel gains of x1 and x10 can be selected through a programmable gain amplifier (PGA). The PGA gain can be configured through software as a single gain for all channels, or real-time control can be used to assign unique gains to each channel