GE VersaMax ® Programmable controller

GE VersaMax ®  Programmable controller

Product Overview

VersaMax ®  It is a new generation control system launched by GE Intelligent Platforms, which has a "three in one" function and can be used as a separate PLC control machine, I/O substation (controlled by other main control devices through fieldbus), or form a distributed large-scale control system. The product design follows the principle of "Six Sigma" and meets multiple international standards such as UL, CUL, CE, etc. It has the characteristics of easy use, economic practicality, high reliability, and rich product structure.

Basic System Structure

Composed of six basic units:

CPU: executes user programs, controls local or distributed I/O modules, and communicates with other PLCs.

NIU (Network Interface Unit): Provides communication protocols for slave stations, connecting I/O modules and hosts.

I/O modules: including various types such as switch quantity, analog quantity, thermal resistance RTD, thermocouple TC, high-speed counter HSC, etc.

I/O base: supports I/O module installation, backplane bus communication, and on-site wiring, and module loading and unloading do not affect wiring.

Communication module: Supports network communication such as Genius, DeviceNet (master), Profibus DP (slave), etc.

Power supply and power auxiliary base: Provides power to the I/O module, and can be added as an auxiliary power supply when the load is insufficient.

Core components and features

CPU module

Supports multiple programming methods (ladder diagram, sequential function diagram, instruction statement, etc.), with functions such as high-speed counter and pulse width modulation output.

Built in RS-232 and RS-485 communication ports, some models (such as IC200CPUE05) have built-in Ethernet interfaces.

Provides program protection, fault diagnosis, and other functions, with a run/stop operation switch and LED indication.

The order number includes IC200CPU001 (34KB memory), IC200CPU002 (42KB memory), IC200CPU005 (64KB memory), etc.

NIU (Network Interface Unit)

Used to use I/O modules as I/O stations on communication buses, supporting multiple network protocols.

Ethernet NIU (IC200EBI001): Supports Modbus TCP and UDP/EGD protocols, with a 10/100Base-T interface.

DeviceNet NIU (IC200DBI001): As a DeviceNet slave, it supports multiple communication structures.

Profibus NIU (IC200PBI001): As a Profibus DP slave, it has a maximum baud rate of 12M.

Genius NIU (IC200GBI001): Connected to the Genius bus, supports redundant configuration.

I/O module

Switching module: including input, output, and hybrid modules, adapted to different voltage, current, and other requirements, supports hot swapping, and each circuit has LED indicators.

Analog module: receives current and voltage signals, processes RTD and thermocouple signals, has a resolution of 12-16 bits, and has isolation and other characteristics.

Partial hybrid modules integrate input and output functions, such as IC200MDD840 (20 point input+12 point relay output).

Power module and base

Power module: Provides 3.3V and 5V voltage, with AC and DC input types, and has functions such as short circuit and overload protection, such as IC200PWR001 (24VDC) and IC200PWR101 (120/240VAC).

Base: including terminal type, compact terminal type, connector type, etc., as well as auxiliary power base (IC200PWB001) and communication base (IC200CHS006).

Expansion module and communication module

Expansion module: By expanding the transmitter (IC200ETM001) and receiver (IC200ERM001/002) to expand the I/O rack, it supports multi rack and local two rack expansion.

Communication modules, such as Profibus DP slave module (IC200BEM002) and DeviceNet master module (IC200BEM103), enhance system communication flexibility.

Programming and configuration

Using VersaPro ™ Programming software (Windows environment) that supports hardware configuration, logic editing, online monitoring, and other functions.

The software supports multiple programming languages and protocols, and provides tools for error diagnosis. The order numbers include IC641VPH300 (including cables and converters) and IC641VPS300 (excluding).

Micro and Nano PLCs

Nano PLC: 10 point I/O, such as IC200NDD010 (6 inputs+4 outputs, 12VDC).

Micro PLC: expandable to 84 points, supports floating-point operations, high-speed counting, etc., such as IC200UDR001 (8 inputs+6 relay outputs).

Provide kit products, including PLC, programming software, cables, etc.

Environment and General Specifications

Environmental parameters: working temperature 0-60 ℃, storage temperature -40-85 ℃, humidity 5% -95% (no condensation), resistance to vibration, impact, etc. in accordance with international standards.

EMC characteristics: Compliant with CISPR 11/EN 55011 and other standards, possessing anti-static and radio frequency interference resistance capabilities.