ACDC-41 Ryan servo drive power board



Ryan servo drive power module failure repair steps:

1. Check the plug of the servo driver first

2. Only when there is enough power in the circuit, the Ryan servo drive will continue to work. Check fuses, connections, and controllers. Do not run the servo drive at full capacity for long periods of time because the fan is turned off

3. You should isolate the motor and cable supporting the servo drive to ensure that the fault is in the power module of the servo drive, not the motor or cable. If it happens to be a ground leak, the part needs to be replaced.

4. Check the connection and replace the power module of the Ryan servo drive.

5. Press the reset key once, if the fault does not occur again, do not press the reset key again immediately, because it may cause further damage to the motor and drive module. If the reset does not work, you may need to replace the cable, power module, or servo motor.

Reasons for power module failure of Ryan servo drive:

1. The temperature of the servo drive is too high. If the drive load is not reduced, the system will shut down

2. There is no auxiliary power supply to run the interface card.

3. The fuse of the power module of Ryan servo drive is faulty

4. Ground leaks exist in the power module, power cable, motor, motor cable, or driver module.

5. The motor feedback cable connection is faulty or broken

6. The high speed of the servo motor causes the problem of the power module of the servo driver

7. The motor supporting the servo drive is faulty

8. The module of Ryan servo drive is faulty

9. The BLC signal is faulty

10. The current of Ryan servo drive is too large, the unit will stop

11. The power module is faulty due to short circuit or ground leakage of the servo driver cable or connection

12. The motor supporting Ryan servo drive is short circuit or ground fault

Choose Xiamen control Smith after sale worry

Excellent product quality

Only cooperate with manufacturers of first-line brands in the industry

Imports/Products

Good pre-sale service

Communicated with customers repeatedly about product model, quality, price and delivery date

Work with the customer to determine the best solution

Address user concerns in advance

Business execution in place

Ordered products delivered on time

Make perfect delivery plan to ensure the time limit

Assist users to handle the acceptance procedures

Perfect after-sales service

During the warranty period, problems will only be replaced and not repaired

Never put a problem on the back of your head

Service hotline 7x24 hours service

Solemn promise

1. All the items sold by the company, module card parts, etc., the quality problems arising from normal use during the warranty period are replaced free of charge, and there is no evasion.

2. For materials and equipment that have not been discontinued beyond the warranty period, only the cost of relevant parts will be charged for quality problems.

3. Provide replacement models and equipment replacement process services for discontinued materials and equipment.

4. Customers have purchased materials and equipment, lifetime free upgrade system software, related technical information provided free of charge.

5. Visit the use of materials purchased by customers from time to time, and solve any problems in time.

6. The company hotline provides 24-hour service, and the questions raised by customers are answered within 1 hour.

7. Not done, the company spirit of "thoughtful service, responsible to the end" attitude, from the customer's point of view to solve the problem, with serious and rigorous enterprise style, dedicated to each customer service.