Inverter Emerson EV6000G



Communication module

Fieldbus adapter

Model :TDS-PA01

Through the TDS-PA01 fieldbus adapter, the ENYDRIVE series inverter can be transferred. Connect to the PROFIBUS fieldbus network. The PROFIBUS fieldbus network

In the system, the inverter will work as a slave station.

Implementation functions:

l) Send control commands to the inverter (such as: start, stop, point, etc.);

2) Send the speed or frequency given signal to the inverter:

3) Read the working status information and actual value from the inverter;

4) Reset the inverter.

Built-in expansion card options

PG expansion card

The EV60-PGABS Differential Incremental PG speed card is a 5V differential incremental encoder interface that supports PG's ABZUVW signal for speed or position feedback and synchronization

Control.

EV60-PGSIN Sine-cosine PG speed measurement card supports sin/cos encoder and can be used for synchro control.

EV60-PGRLV Rotary transformer PG speed measurement card supports Resolver encoder and can be used for synchro control. See the EV60-PGRLV Speed Card User Manual for details.

Inverter installation environment

Installed in indoor, well-ventilated places, generally should be installed vertically.

When selecting an installation environment, note the following:

The ambient temperature must be in the range of -10 ° C to 40 ° C. If the temperature exceeds 40 ° C, external heat dissipation or derating is required.

Humidity requirements are lower than 95%, no condensation:

Installed in places with vibration less than 5.9m/s²(0.6g);

Avoid installation in direct sunlight:

In order to prevent unauthorized personnel from reaching the inverter, it is generally required to be installed in the cabinet and meet the requirements of pollution level 2 defined by IEC60664-1;

In the absence of a cabinet, the frequency converter shall be installed in a restricted area that is protected from unauthorized persons and meets the requirements of pollution level 2 as defined by IEC60664-1.

If there are special installation requirements, please consult and confirm in advance.

Installation of plastic cover plate:

Install the top cover first, and then the bottom cover as follows:

1) Insert the mounting claw at the top of the top cover plate into the mounting hole at the top of the chassis;

2) Press the lower part of the top cover plate and insert its mounting claw into the box until the cover plate is installed in place;

3) Align the mounting screw holes under the top cover plate and screw:

4) Insert the mounting claw at the top of the bottom cover plate into the mounting hole at the bottom of the top cover plate;

5) Press the lower part of the bottom cover plate and insert its mounting claw into the box until the cover plate is installed in place;

6) Align the mounting screw holes under the bottom cover plate and fasten the screws.

Choose Xiamen control Smith after sale worry

Excellent product quality

Only cooperate with manufacturers of first-line brands in the industry

Imports/Products

Good pre-sale service

Communicated with customers repeatedly about product model, quality, price and delivery date

Work with the customer to determine the best solution

Address user concerns in advance

Business execution in place

Ordered products delivered on time

Make perfect delivery plan to ensure the time limit

Assist users to handle the acceptance procedures

Perfect after-sales service

During the warranty period, problems will only be replaced and not repaired

Never put a problem on the back of your head

Service hotline 7x24 hours service

Solemn promise

1. All the items sold by the company, module card parts, etc., the quality problems arising from normal use during the warranty period are replaced free of charge, and there is no evasion.

2. For materials and equipment that have not been discontinued beyond the warranty period, only the cost of relevant parts will be charged for quality problems.

3. Provide replacement models and equipment replacement process services for discontinued materials and equipment.

4. Customers have purchased materials and equipment, lifetime free upgrade system software, related technical information provided free of charge.

5. Visit the use of materials purchased by customers from time to time, and solve any problems in time.

6. The company hotline provides 24-hour service, and the questions raised by customers are answered within 1 hour.

7. Not done, the company spirit of "thoughtful service, responsible to the end" attitude, from the customer's point of view to solve the problem, with serious and rigorous enterprise style, dedicated to each customer service.