GE 531X139APMAPG2 | General Electric Drive Application Board

GE 531X139APMAPG2 | General Electric Drive Application Board

Product Description P/N: DS200DCFBG1B DESCRIPTION / SPECIFICATIONS Description The DS200DCFBG1B Power Supply Board is one of the more critical boards included in a wide variety of GE Turbine Control System applications. The board mounts easily in the various applications for which it is used and simply requires the placement of numerous jumpers along with connecting the ribbon cables that attach to the front. It's function is to receive the input voltage and distribute control level power to the drive as needed. Technical Specifications Brand General Electric Series Mark V, AC2000, CB2000, DC2000, FC2000, ME2000, and EX2000 Part Number DS200DCFBG1B Product Type Power Supply Board Shipping Dimensions 20 inches by 16 inches by 16 inches Information About DS200DCFBG1B DS200DCFBG1B is a power supply board manufactured by General Electric for the Mark V board series. 

AC2000, CB2000, DC2000, FC2000, ME2000, and EX2000 series machines can have the board installed in the drive. When installed, this card can provide both control level power and enclosure fan power to the drive. Voltages rated between 38 and 115 VAC can be directly supplied to the board via the control power transformer. Frequencies for the board are dependent upon the input voltage, but can range from 0 to 500 kHz. The board features a number of circuits that work to power the board and the installed drive. DS200DCFBG1B is comprised of motor field power, driver, AC/DC monitoring, and control level supply circuits. The twelve jumpers and seven DIP switches found on the board provide users with configurable system options. Fuse switch diagnostics are presented using the two LED and one neon indicator lights found on the board. Three protective fuses prevent any interruptions in power supplies. Voltages can be monitored using the five test points integrated on the board. Manufacturer provided installation and storage parameters for both the DS200DCFBG1B and the installed drive should be followed. 

These will prevent any accidental or preventable damages to both units. For a complete guide to wiring and installing the board, please reference the device manual and datasheet. Originally, technical support for this board and the Mark V series was provided by the manufacturer, General Electric. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required