ABB Ribbon Cable 5410368948 H&B Contronic

ABB Ribbon Cable 5410368948 H&B Contronic

Basic information

The 5410368948 is a ribbon cable from the H&B Contronic range and has a specific fit and function within the relevant product family.

Features and benefits

High flexibility and durability: Made of high-quality materials and special manufacturing process, it has good flexibility, can work normally under different bending radii, and is wear-resistant and corrosion-resistant, which can adapt to complex industrial environments and frequent use requirements.

Stable signal transmission: the internal wires are arranged neatly and tightly, and have good insulation and shielding performance, which can effectively reduce signal interference and attenuation, ensure the accuracy and stability of signal transmission, and guarantee the normal operation of the equipment.

Easy to install and maintain: Its ribbon structure makes it easier to wire and connect during installation, which can improve installation efficiency and reduce installation cost, and also facilitate the maintenance and overhaul work in the later stage.

Application Areas

Industrial automation control system: commonly used in automated production line signal transmission between various devices, such as PLC, sensors, actuators and other equipment connection, to achieve the co-operation between the equipment and data interaction.

Instrumentation equipment: in all kinds of instrumentation, as a connection between internal circuits, to ensure the normal operation and measurement accuracy of instrumentation.

Communication equipment: It can be used for signal transmission between internal circuit boards of communication equipment to guarantee the signal processing and data transmission function of communication equipment.

OTHER INFORMATION

• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled: 

– no high explosive risks 

– no strong magnetic fields 

– no direct sunlight 

– no large, sudden temperature changes 

• Install the operator panel according to the accompanying installation instructions. 

• Ground the operator panel according to the accompanying installation instructions. 

• Only qualified personnel may install the operator panel. 

• Separate the high voltage, signal and supply cables. 

• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet. 

• Peripheral equipment must be appropriate for the application and location. 

• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into. 

• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.