ABB FI830F 3BDH000032R1A Fieldbus module

ABB FI830F 3BDH000032R1A Fieldbus module

DESCRIPTION

The ABB FI830F 3BDH000032R1A is a powerful, easy-to-configure Profibus DP interface module that meets the need for efficient communication and data exchange in industrial automation and process control systems. Its high integration, redundant operation and status indication further enhance system reliability and stability. In practical application, the module can bring significant economic and social benefits to users.

Main Functions and Features

Profibus DP interface: the module provides a Profibus DP interface and supports the Profibus DP V1 protocol with a data communication rate of up to 12 Mbd. this makes it easy to integrate into industrial automation systems that support Profibus DP.

High Integration: The module's compact design and high degree of integration enable it to realise complex communication and control functions in a limited space.

Easy to Configure: Configuration and parameter setting can be done using CBF software without additional programming software, which reduces the difficulty and cost of configuration.

Redundant operation: supports redundant operation through redundant field controllers, improving system reliability and stability.

Status Indication: The module is equipped with status indicator, which can intuitively display the working status and communication status of the module, making it easy for users to carry out troubleshooting and maintenance.

Technical Parameters

Transmission rate: up to 12Mbd

Support the number of slaves: allows the connection of 126 Profibus slaves

Interface type: RS485 electrically isolated interface

On-board memory: shared memory (128KB), minimum occupation of the basic unit memory

Power loss: Typical 2.4W-2.8W during operation, depending on communication scan cycle

Output current: 20mA maximum

Output voltage: 5V ± 5 per cent

Overvoltage protection: +7.5V/-5V

Weight: approx. 0.15kg

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider